Granulator for dry and wet granulation of powders "YR-100"
Performance
Dry granulation: (with a mesh size of 1 mm sieve) - 200 kg per hour
Wet granulation: (with a mesh size of 1 mm sieve) - 100 kg per hour
Replaceable sieves: plastic or stainless mesh
Granule sizes: from 0.5 mm to 3 mm
Placement: table, floor
The diameter of the blades rubbing through the mesh: 120 mm
Turning blades: 360 degrees
Engine power: 1.1 kW, 380V / 220V, 50 Hz
Blade rotation speed: 55 rpm
Overall dimensions: height 700 mm, width 400 mm, length 1050 mm
Weight: 150 kg
Shipping Weight: 160 kg

This granulator model is a simple mechanical device that wipes moistened powder through holes in a mesh or stainless steel sheet. Granulator: does not mix powder; does not moisturize the powder; does not mix moistened powder; does not dry granules; does not divide granules into good and non-standard; Does not produce pellets of the same size form. The function of the granulator is to wipe the moistened powder through the holes. Check if the granulator is right for you. Prepare 1 kg of powder, moisten (after studying the theory and materials for moisturizing) to such an extent that the powder leaves an imprint in the hand when it is compressed. Strong moisture will not form granules, weak too. With strong moisture, a longer drying time of the granules will be required. After mixing the powder evenly and moisturizing it, you get a mass ready for granulation. It is necessary to make a frame of 400 x 400 mm from wooden boards and nail a metal mesh onto it. The thickness of the wire is at least 0.5 mm, the mesh size is 2 mm by 2 mm. Spread the moistened mass on the mesh, with a plastic or steel spatula, wiping from side to side, wiping the powder through the mesh. This way you get granule samples. The quality of the granules depends on the combination of moisturizing substances and the amount of this liquid in the powder mass. If with such an experiment you get high-quality granules - you can safely buy a granulator.

Before choosing a granulator, you need to test the material to determine the method for producing the granules, it may take some time.

Sergey Nikolaev, Smolensk

After the granulation process, it is required to dry the granules before performing packing and packaging operations.

Edward, Mozhaisk

Two months after the purchase, the granulator for dry and wet granulation of powders began to periodically very loud noise. It was noisy as if it was about to break, after a couple of minutes, and I called the company in order to send a specialist. A few days later, a specialist arrived and said that one of the parts was out of order. The company quickly sent a spare part and installed it. After that, the equipment works as it should.

Savely, Murmansk

YR-100 is a successful granulator model for dry and wet granulation of powders. At our enterprise it costs the same, and we are very pleased with its work.

a lion, Moscow

A granulator for dry and wet granulation was simply necessary for our production. We ordered several at minipress. It is nice to work with such a responsible company.

Konstantin Alexandrov, Saratov

The granulator we ordered for dry and wet granulation was delivered on time. Quality equipment. I will order more.

Anna Nesterova, Engineer, Tambov