Granulator for wet granulation of powders "ZL-12"
Performance
Wet granulation: (at a mesh size of 1 mm) 150 kg per hour
Replaceable sieves: stainless conical
Granule sizes: from 0.5 mm to 2 mm
Placement: floor
Engine power: 1.5 kW, 220V, 50 Hz
Blade rotation speed: 1500 rpm
Overall dimensions: 1150mm x 450mm x 1500mm
Weight: 155 kg
Shipping Weight: 185 kg

Use rotor blades and cone sieves with a high-speed movement that wipes the moistened powder through the sieve cells. Instant production of finished granules, less heat, high efficiency and good quality. Using frequency regulation, adjustable rotation speed, wide range of travel. The apparatus and contact parts of the material, as well as the case, are made of high quality stainless steel, polished surfaces. For wet granulation collaboration with fluid bed drying equipment. Mainly for wet granulation and granulation of powders by spraying, as well as the destruction of bulk materials and waste tablets in accordance with the size requirements for the size of the granules. Also granulating food and processing biscuits and other solid materials that can be crushed and granulated.  At the base of the machine is the shaft of an electric motor, on which the blades are dressed. The walls of the housing into which the moistened powder is supplied are made of perforated steel. During rotation, the blades squeeze (wipe) the wet powder through the holes, the resulting granules can have both the shape of a sphere and worms. The shape of the granules depends on the properties of the powder, moisturizer and binder. Be sure to consult us on the technology of preparing the powder for granulation. Granulator: does not mix powder; does not moisturize the powder; does not mix moistened powder; does not dry granules; does not divide granules into good and non-standard; Does not produce pellets of the same size form. The function of the granulator is to wipe the moistened powder through the holes. Check if the granulator is right for you. Prepare 1 kg of powder, moisten (after studying the theory and materials for moisturizing) to such an extent that the powder leaves an imprint in the hand when it is compressed. Strong moisture will not form granules, weak too. With strong moisture, a longer drying time of the granules will be required. After evenly mixing the powder and moisturizing it, you get
mass ready for granulation. It is necessary to make a frame of 400 x 400 mm from wooden boards and nail a metal mesh onto it. The thickness of the wire is at least 0.5 mm, the mesh size is 2 mm by 2 mm. Spread the moistened mass on the mesh, with a plastic or steel spatula, wiping from side to side, wiping the powder through the mesh. This way you get granule samples. The quality of the granules depends on the combination of moisturizing substances and the amount of this liquid in the powder mass. If with such an experiment you get high-quality granules - you can safely buy a granulator.

The optimal model for granulation and for grinding pharmaceutical raw materials. Productivity 150 kg per hour covers all production needs.

Denis Ivanovich, Ufa

We bought a granulator of this model for crushing substandard tablets. It is required to select materials for wetting the powders, the resulting granules must be dried before use.

Anton Yakubovsky, Kazan

Long searched for a granulator for wet granulation. We got a competent consultation from Roman. There were some nuances, but overall were satisfied with the purchase.

Vadim Morozov, Procurement specialist, Moscow

Thanks to the help of your employees, we decided to use the ZL-12 model for wet granulation in production, which allowed us to complete the work on time.

Volkova A.P., Technologist, Astrakhan

The wet granulation granulator is broken. Purchased a new, more modern. Delivery was fast, the documents are in order.

Kravtsova E.P., Vologda

Modernized production. The granulator for wet granulation was delivered on time. Increased production volumes on new equipment. I was satisfied with the service.

Ershov Genadiy, Technologist, Tomsk