Video review of the model
More videos of this model:
Our service and customer service
Hydraulic press “LP-100”
Number of pairs of press tools: 1-10
Maximum pressing force: 1000 KN (100,000 kg / cm2)
Maximum diameter of tablets: 200 mm
Maximum tablet thickness: 100 mm
Maximum backfilling depth in the matrix: 180 mm
Maximum productivity: 500-2000 tablets per hour
Pressure adjustment: 0 to 100 tons
Upper punch stroke: 200 mm
Lower punch stroke: 250 mm
Productivity: 3-4 cycles per minute
Engine power: 11KW, 380V, 50Hz, 3 phases
Hydraulic system: Taiwan brand, CE, Mitsubishi PLC
Machine size: 1800mm x 1600mm x 2600mm
Machine weight: 3500 kg (with packing 4000 kg)
Dimensions with packing: 2200mm x 1800mm x 2850mm
Manufacturing time: 35-40 days (including molds)
Hydraulic Pressure Press The LP-18 is a small continuously operating automatic hydraulic press. The machine can wring out special forms, rings, and also tablets of different forms, on both sides of the tablet it is possible to print trademarks and logos. Controlling the machine on the “LCD” of all operating parameters can be adjusted. Bi-directional press, a powerful feeder, high density of powder in a tablet. Full control of the press through the LCD panel. Hydraulic press is designed for pressing tablets from powder mass. Productivity is regulated, with a maximum value of 500 – 5000 tablets per hour. We complete this press with molds: matrices of various diameters (from 20 to 50 mm) and punches. Punches with a long body are upper and set to the upper part of the press. Punches with a short body and a long working part are lower and their task is to push the tablet out of the matrix. They are installed at the bottom of the press. The press operates in automatic mode. Before switching on the press and starting the work, it is necessary to carefully study the video instruction and familiarize yourself with the principles of its operation. After that, its operation will become clear and simple for you. All adjusting works and adjustments are made in manual mode by rotating the wheel. Be careful when connecting the motor, the direction must match the arrow indicated. The powder is fed into the press through a funnel-shaped hopper. It can be easily removed, rinsed and installed back. The feed of the powder from the hopper is through the feeder. It is possible to supply an active feeder with forced powder feeding into the matrix. When the hydraulic cylinder of the press is raised, the powder is fed into the die, where the pressing takes place and then the tablet is pushed out to the surface. On the body of the press there is a control unit. We make to order any sets of press tools (punch and matrix for rotary tablet presses).
OUR SERVICES FOR CLIENTS:
1) TRAINING PRESSING TECHNOLOGY.
To all our customers who purchased equipment, we provide literature on the basics of tablet pressing. We carry out consultations by phone and by correspondence, we help to solve arising difficulties at manufacture on our equipment. We supply spare parts and consumables. We render services in the help on realization of the hydraulic presses, second-hand.
2) WE COMPLETE MANUFACTURE OF TABLETS.
We have a large assortment of additional equipment for tablet production. At the request of the client, we will select a model for the desulphurizer of tablets, a vacuum powder feeding system for press silos, granulators, powder mixers, equipment for coating tablets, printers for printing logos on tablets, packing and packing equipment for tablets.
3) MANUFACTURING PUNCHES AND MATRIXES.
On a permanent basis, we produce press tools for hydraulic presses in our own production, we place orders for similar plants in India, China, and the USA.
4) SPARE PARTS SUPPLY
We cooperate with manufacturers of tablet presses and we are engaged in deliveries of spare parts for any model of hydraulic presses purchased in our company.