Hydraulic press “LP-300”
Block weight : 1-5 kg
Maximum pressing force: 3000 KN ( 300000 kg/cm2 )
Maximum tablet diameter: 250 mm
Maximum tablet thickness: 150 mm
Maximum backfill depth in the die: 250 mm
Maximum output: 500-2000 tablets per hour
Pressure adjustment: 0 to 300 tons
Upper punch stroke: 250 mm
Lower punch stroke: 250 mm
Capacity: 2-3 cycles per minute
Motor power: 18.5KW, 380V, 50Hz, 3 phases
Hydraulic System: Taiwan brand, CE, Mitsubishi PLC
Machine size: 3500mm x 2200mm x 3600mm
Machine weight: 6500kg ( weight with packing 7500kg)
Dimensions with packing: 3500mm x 2200mm x 3600mm
Lead time: 35-40 days (including molds)

Hydraulic pressure press Model LP-300 is a small, continuously operating automatic hydraulic press. The machine can press special molds, rings, as well as tablets of different shapes, it is possible to print trademarks and logos on both sides of the tablets. The machine control on the LCD of all operating parameters can be adjusted. Bidirectional press, powerful feeder, high powder density in the tablet. Full control of the press through LCD panel. Hydraulic press is designed to press powdered tablets. The capacity is adjustable, with a maximum of 500 – 2000 tablets per 1 hour. We complete this press with molds: dies of different diameters (from 20 to 250 mm) and punches. Punches with a long body are upper and installed in the upper part of the press. Punches with short body and long working part are lower and their task is to push the tablet out of the die. They are installed in the lower part of the press. The press operates in automatic mode. Suitable for large-scale powder pressing which require high density, while the multichip module can be used for large-scale manufacturing industries, equipment, high compression accuracy, easy mold replacement and punch installation. High degree of automation. All control actions with PLC microcomputer, continuous automatic operation. Compression time, pressure force, briquette thickness can be properly adjusted. The press manufacturer is engaged in the research, development and production of non-standard equipment for pressing large tablets and briquettes. This kind of hydraulic press has a wide range of application. There is a lot of experience in pressing tablets and briquettes of various powder materials. Besides offering various hydraulic press machines, the manufacturer can also provide technical support on molds, dies and punches for different shapes of briquettes for customers. After receiving the hydraulic press by the customer, the factory will organize the arrival of the adjusters to adjust the machine and also train the workers how to use it. The warranty on this machine will be one year, the manufacturer will provide spare parts to the door within one year. The whole hydraulic system is imported from Taiwan, high stability, avoid oil leakage and environmental pollution, also ensure good pressure, and continuous synchronization of press action. The working part and separation part of the hydraulic system is independent, no environmental pollution, automatic heating make the hydraulic press work more durable. We produce any sets of press tools (punches and dies for rotary tablet presses) to order.

OUR SERVICE AND SERVICES FOR CUSTOMERS:

1) TRAINING OF PRESSING TECHNOLOGY.
All our customers who have purchased equipment, we provide literature on the basics of tablet pressing. We provide consultations by phone and by correspondence, we help to solve the arising difficulties during the production on our equipment. We supply spare parts and consumables. We render services in assistance in realization of used hydraulic presses.
2) COMPLETE THE PRODUCTION OF TABLETS.
We have a wide range of additional equipment for tablet production. At the customer’s request, we will select the model of tablet dedusters, vacuum system of powder supply to the hoppers of the press, granulators, powder mixers, equipment for coating tablets, printers for printing logos on tablets, filling and packaging equipment for tablets.
3) MANUFACTURE OF PUNCHES AND DIES.
On a permanent basis we manufacture press tools for hydraulic presses at our own production facilities, we place orders at similar production facilities in India, China, USA.
4) SUPPLY OF SPARE PARTS
We cooperate with manufacturers of tablet presses and supply spare parts for any model of hydraulic presses purchased in our company.