Dissolution analyzer for tablets and capsules “RC-06”
Speed range: (20-200) revolutions per minute
Rotation speed error: ±2 rpm
Liquid temperature control temperature: approximately +45℃
Temperature stability: ±0.3℃
Timer setting time: 6 positions (1-999) minutes
Time error: ±0.5min
Paddle stop time: ±0.5min
Tank stop time: ±1.0min
Power: 220V/50Hz/1000W or 110V/60Hz/1000W
Dimensions: 960mm x 320mm x 480mm
Size with packing: 1220mm x 480mm x 590mm
Weight: 45 kg
Weight with packing: 60 kg

The main parts of this equipment turn smoothly and flexibly. All tanks and blades are made of stainless steel (SUS316L). The water flow is circulated by magnetic pump, evenly distributed throughout the system, and the “water bath” maintains the same temperature. This tablet dissolving device is equipped with automatic control of temperature, speed change and time. These parameters are set by a timer. They can be controlled using the push buttons. The results are displayed on the panel. The set values on the timer and the values during operation can be displayed alternately. Automation: auto-test, auto-diagnosis, auto-alarm. The equipment can test itself and signal automatically. Dissolution parameters of substances are stored in the equipment memory and can be displayed at any time. The time can be set on the timer for many positions. The signaling device signals automatically for any timer position and then the tester automatically moves to the next position.