PHARMA

Tablets as a dosage form

8316

8122186

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Tablet (from Lat. tabella — tablet, tile) is a dosed dosage form obtained by pressing medicinal or a mixture of medicinal and auxiliary substances. Intended for internal, sublingual, implantation or parenteral use. The first information about tablets dates back to the middle of the XIX century. In USA, the first large tablet workshop opened in 1895 in St. Petersburg. Tablets are one of the most common and promising dosage forms and, as mentioned earlier, currently account for about 80% of the total volume of finished dosage forms. This is due to the fact that tablets have a number of advantages over other dosage forms, namely: the accuracy of dosing of medecine injected into tablets; the portability of tablets, which provides convenience of dispensing, storage and…

Mixing powders

8401

8123028

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

After the grinding and sieving operations, mixing follows, the purpose of which is to obtain a homogeneous mixture of powders. Mixing is usually carried out in parallel with grinding. This leads to the alignment of particle sizes and obtaining a more homogeneous mass. If a component is included in the mixture in a small amount, then additional grinding of its particles is necessary to increase the uniformity of distribution. At the same time, the lower the concentration of it in the mixture, the smaller the particles of this ingredient should be. If a small amount of a poisonous or potent ingredient is added to a large number of substances, then first the latter substance must be thoroughly mixed with one of the ingredients or an...

Fluidized bed dryer CJM-60

9345

8132473

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Fluidized bed dryer dryer uses a stream of hot air to keep the pellets in a “suspended” state in the pseudo-liquefied layer and dry them quickly, the spent water evaporates with the air flow. This equipment is used in the production of medical herbal preparations, combined powders, granules, lumpy materials, chemical products, etc. Quick drying. The temperature is strictly controlled during drying to ensure the quality of the material after drying. For the production of large granules and lumpy materials, there is a mixing knife designed horizontally for quick drying and to avoid sticking to the wall. The machine operates under negative pressure, has a smooth and clean inner surface without dead corners, convenient for cleaning. Fully complies with GMP requirements. User manual and technical…

Spiral multilayer dusting machine LTM-13

9347

8132490

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Spiral multilayer dedusting device for tablets and capsules is designed and manufactured on the basis of international technologies and performs two functions: loading tablets and dedusting tablets. The advantage of this model lies in the long paths through which the tablets pass during the dedusting process, with continuous turning and polishing. The dedusting agent effectively but delicately polishes the tablets without damaging them in the process. At the same time, it can serve as a transmission tool. The machine fully complies with GMP standard, adopting a new structure, guarantees safety and stability. User manual and technical data sheet in English. Completeness and operability are guaranteed. We maintain a stock of parts and consumables in stock. The price is based on delivery to the buyer’s city.

Pigment inkjet printer JPW-26

9351

8132533

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The pigment inkjet printer is mainly used for printing date, serial number, etc. It is widely used in the chemical industry, in the production of rubber, auto parts, large pipes, steel, etc. For dark-colored materials such as steel pipes, steel plates, tires. The host controller has an operating menu that switches from Chinese to English. Manual, movable. The print management modules can be shared with the host controller and work independently. You can use an auto-flash device to prevent clogging of the spray nozzles. One host controller can control max. 8 print controllers and a printhead. A separate ink system, a pump built into the design, pressure adjustment, a patented device for saving energy and increasing the reliability of the machine. The print head can rotate…

Pigment inkjet printer JPW-27

9351

8132534

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The pigment inkjet printer is mainly used for printing date, serial number, etc. It is widely used in the chemical industry, in the production of rubber, auto parts, large pipes, steel, etc. For dark-colored materials such as steel pipes, steel plates, tires. The host controller has an operating menu that switches from Chinese to English. Manual, movable. The print management modules can be shared with the host controller and work independently. You can use an auto-flash device to prevent clogging of the spray nozzles. One host controller can control max. 8 print controllers and a printhead. A separate ink system, a pump built into the design, pressure adjustment, a patented device for saving energy and increasing the reliability of the machine. The print head can rotate…

Fluidized bed dryer CJM-500

9354

8132564

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Fluidized bed dryer uses a stream of hot air to keep the pellets in a “suspended” state in the pseudo-liquefied layer and dry them quickly, the spent water evaporates with the air flow. This equipment is used in the production of medical herbal preparations, combined powders, granules, lumpy materials, chemical products, etc. Quick drying. The temperature is strictly controlled during drying to ensure the quality of the material after drying. For the production of large granules and lumpy materials, there is a mixing knife designed horizontally for quick drying and to avoid sticking to the wall. The machine operates under negative pressure, has a smooth and clean inner surface without dead corners, convenient for cleaning. Fully complies with GMP requirements. User manual and technical data sheet…

Fluidized bed dryer CJM-300

9354

8132565

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Fluidized bed dryer dryer uses a stream of hot air to keep the pellets in a “suspended” state in the pseudo-liquefied layer and dry them quickly, the spent water evaporates with the air flow. This equipment is used in the production of medical herbal preparations, combined powders, granules, lumpy materials, chemical products, etc. Quick drying. The temperature is strictly controlled during drying to ensure the quality of the material after drying. For the production of large granules and lumpy materials, there is a mixing knife designed horizontally for quick drying and to avoid sticking to the wall. The machine operates under negative pressure, has a smooth and clean inner surface without dead corners, convenient for cleaning. Fully complies with GMP requirements. User manual and technical…

Fluidized bed dryer CJM-200

9354

8132566

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Fluidized bed dryer uses a stream of hot air to keep the pellets in a “suspended” state in the pseudo-liquefied layer and dry them quickly, the spent water evaporates with the air flow. This equipment is used in the production of medical herbal preparations, combined powders, granules, lumpy materials, chemical products, etc. Quick drying. The temperature is strictly controlled during drying to ensure the quality of the material after drying. For the production of large granules and lumpy materials, there is a mixing knife designed horizontally for quick drying and to avoid sticking to the wall. The machine operates under negative pressure, has a smooth and clean inner surface without dead corners, convenient for cleaning. Fully complies with GMP requirements. User manual and technical data sheet…

Fluidized bed dryer CJM-120

9354

8132567

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Fluidized bed dryer uses a stream of hot air to keep the pellets in a “suspended” state in the pseudo-liquefied layer and dry them quickly, the spent water evaporates with the air flow. This equipment is used in the production of medical herbal preparations, combined powders, granules, lumpy materials, chemical products, etc. Quick drying. The temperature is strictly controlled during drying to ensure the quality of the material after drying. For the production of large granules and lumpy materials, there is a mixing knife designed horizontally for quick drying and to avoid sticking to the wall. The machine operates under negative pressure, has a smooth and clean inner surface without dead corners, convenient for cleaning. Fully complies with GMP requirements. User manual and technical data sheet…