EQUIPMENT WITH REVIEWS

Mixing powders

7914

6499783

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

After the grinding and sieving operations, mixing follows, the purpose of which is to obtain a homogeneous mixture of powders. Mixing is usually carried out in parallel with grinding. This leads to the alignment of particle sizes and obtaining a more homogeneous mass. If a component is included in the mixture in a small amount, then additional grinding of its particles is necessary to increase the uniformity of distribution. At the same time, the lower the concentration of it in the mixture, the smaller the particles of this ingredient should be. If a small amount of a poisonous or potent ingredient is added to a large number of substances, then first the latter substance must be thoroughly mixed with one of the ingredients or an...

Pigment inkjet printer JPW-26

8864

6509288

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The pigment inkjet printer is mainly used for printing date, serial number, etc. It is widely used in the chemical industry, in the production of rubber, auto parts, large pipes, steel, etc. For dark-colored materials such as steel pipes, steel plates, tires. The host controller has an operating menu that switches from Chinese to English. Manual, movable. The print management modules can be shared with the host controller and work independently. You can use an auto-flash device to prevent clogging of the spray nozzles. One host controller can control max. 8 print controllers and a printhead. A separate ink system, a pump built into the design, pressure adjustment, a patented device for saving energy and increasing the reliability of the machine. The print head can rotate…

Pigment inkjet printer JPW-27

8864

6509289

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The pigment inkjet printer is mainly used for printing date, serial number, etc. It is widely used in the chemical industry, in the production of rubber, auto parts, large pipes, steel, etc. For dark-colored materials such as steel pipes, steel plates, tires. The host controller has an operating menu that switches from Chinese to English. Manual, movable. The print management modules can be shared with the host controller and work independently. You can use an auto-flash device to prevent clogging of the spray nozzles. One host controller can control max. 8 print controllers and a printhead. A separate ink system, a pump built into the design, pressure adjustment, a patented device for saving energy and increasing the reliability of the machine. The print head can rotate…

Fluidized bed dryer CJM-500

8867

6509319

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Fluidized bed dryer uses a stream of hot air to keep the pellets in a “suspended” state in the pseudo-liquefied layer and dry them quickly, the spent water evaporates with the air flow. This equipment is used in the production of medical herbal preparations, combined powders, granules, lumpy materials, chemical products, etc. Quick drying. The temperature is strictly controlled during drying to ensure the quality of the material after drying. For the production of large granules and lumpy materials, there is a mixing knife designed horizontally for quick drying and to avoid sticking to the wall. The machine operates under negative pressure, has a smooth and clean inner surface without dead corners, convenient for cleaning. Fully complies with GMP requirements. User manual and technical data sheet…

Fluidized bed dryer CJM-300

8867

6509320

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Fluidized bed dryer dryer uses a stream of hot air to keep the pellets in a “suspended” state in the pseudo-liquefied layer and dry them quickly, the spent water evaporates with the air flow. This equipment is used in the production of medical herbal preparations, combined powders, granules, lumpy materials, chemical products, etc. Quick drying. The temperature is strictly controlled during drying to ensure the quality of the material after drying. For the production of large granules and lumpy materials, there is a mixing knife designed horizontally for quick drying and to avoid sticking to the wall. The machine operates under negative pressure, has a smooth and clean inner surface without dead corners, convenient for cleaning. Fully complies with GMP requirements. User manual and technical…

Fluidized bed dryer CJM-200

8867

6509321

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Fluidized bed dryer uses a stream of hot air to keep the pellets in a “suspended” state in the pseudo-liquefied layer and dry them quickly, the spent water evaporates with the air flow. This equipment is used in the production of medical herbal preparations, combined powders, granules, lumpy materials, chemical products, etc. Quick drying. The temperature is strictly controlled during drying to ensure the quality of the material after drying. For the production of large granules and lumpy materials, there is a mixing knife designed horizontally for quick drying and to avoid sticking to the wall. The machine operates under negative pressure, has a smooth and clean inner surface without dead corners, convenient for cleaning. Fully complies with GMP requirements. User manual and technical data sheet…

Fluidized bed dryer CJM-120

8867

6509322

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Fluidized bed dryer uses a stream of hot air to keep the pellets in a “suspended” state in the pseudo-liquefied layer and dry them quickly, the spent water evaporates with the air flow. This equipment is used in the production of medical herbal preparations, combined powders, granules, lumpy materials, chemical products, etc. Quick drying. The temperature is strictly controlled during drying to ensure the quality of the material after drying. For the production of large granules and lumpy materials, there is a mixing knife designed horizontally for quick drying and to avoid sticking to the wall. The machine operates under negative pressure, has a smooth and clean inner surface without dead corners, convenient for cleaning. Fully complies with GMP requirements. User manual and technical data sheet…

Fluidized bed dryer CJM-30

8868

6509323

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Fluidized bed dryer uses a stream of hot air to keep the pellets in a “suspended” state in the pseudo-liquefied layer and dry them quickly, the spent water evaporates with the air flow. This equipment is used in the production of medical herbal preparations, combined powders, granules, lumpy materials, chemical products, etc. Quick drying. The temperature is strictly controlled during drying to ensure the quality of the material after drying. For the production of large granules and lumpy materials, there is a mixing knife designed horizontally for quick drying and to avoid sticking to the wall. The machine operates under negative pressure, has a smooth and clean inner surface without dead corners, convenient for cleaning. Fully complies with GMP requirements. User manual and technical data…

Fluidized bed dryer CJM-15

8868

6509324

• 
• 
• 
• 
• 

The liquefied layer dryer uses a stream of hot air to keep the pellets in a “suspended” state in the pseudo-liquefied layer and dry them quickly, the spent water evaporates with the air flow. This equipment is used in the production of medical herbal preparations, combined powders, granules, lumpy materials, chemical products, etc. Quick drying. The temperature is strictly controlled during drying to ensure the quality of the material after drying. For the production of large granules and lumpy materials, there is a mixing knife designed horizontally for quick drying and to avoid sticking to the wall. The machine operates under negative pressure, has a smooth and clean inner surface without dead corners, convenient for cleaning. Fully complies with GMP requirements. User manual and technical data…

Pneumatic tablet press ITA-06

1954

6440192

• 
• 
• 
• 
• 
• 
• 
• 

Laboratory automatic pneumatic tablet press for the pharmaceutical, chemical and food industries, in powder metallurgy for the production of tablets, briquettes and boluses from bulk powder materials. It is used for the production of tablets with a diameter of 6 to 15 mm, the height of tablets up to 10 mm. The maximum depth of filling the powder into the matrix is 20 mm. This model of the press allows you to produce tablets of various shapes: classic, oval, shaped tablets and rings with an inner hole. Increased maximum pressure of 2.2 tons. Suitable for the release of tablets with logos. We provide detailed instructions for setting up the press and manufacturing tablets. Before sending the press to the customer, it is checked and tested…