EQUIPMENT WITH REVIEWS

Linear air rinser for plastic and glass bottles JFQ-12

9193

7644498

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The linear air rinse of plastic and glass bottles is used for rinsing bottles with clean compressed air, which enters the bottle, rinses it from the inside, and then is sucked through another outlet. Since the machine is completely closed, powder, dust, water droplets and impurities in the bottle or on the walls of the bottle are blown out by air. Simple design, stable operation, easy operation and low maintenance cost. Equipped with a hydronium generator, neutralizes static electricity, effectively removes dust on the inner surface of bottles. The automatic conveyor is equipped with bottle indexing gates to control the movement of containers. No tools are required to change attachments or indexing gates. The process is controlled by a PLC controller and a human-machine interface….

Linear air rinser for plastic and glass bottles JFQ-8

9193

7644499

• 
• 
• 
• 
• 

The linear air rinse of plastic and glass bottles is used for rinsing bottles with clean compressed air, which enters the bottle, rinses it from the inside, and then is sucked through another outlet. Since the machine is completely closed, powder, dust, water droplets and impurities in the bottle or on the walls of the bottle are blown out by air. Simple design, stable operation, easy operation and low maintenance cost. Equipped with a hydronium generator, neutralizes static electricity, effectively removes dust on the inner surface of bottles. The automatic conveyor is equipped with bottle indexing gates to control the movement of containers. No tools are required to change attachments or indexing gates. The process is controlled by a PLC controller and a human-machine interface. The…

Linear air rinser for plastic and glass bottles JFQ-4

9193

7644500

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The linear air rinse of plastic and glass bottles is used for rinsing bottles with clean compressed air, which enters the bottle, rinses it from the inside, and then is sucked through another outlet. Since the machine is completely closed, powder, dust, water droplets and impurities in the bottle or on the walls of the bottle are blown out by air. Simple design, stable operation, easy operation and low maintenance cost. Equipped with a hydronium generator, neutralizes static electricity, effectively removes dust on the inner surface of bottles. The automatic conveyor is equipped with bottle indexing gates to control the movement of containers. No tools are required to change attachments or indexing gates. The process is controlled by a PLC controller and a human-machine interface. The…

Сapsules and tablets quality control machine IM-015

9193

7644501

• 
• 
• 
• 
• 

The quality control machine with rotating rollers allows the operator to control hard or soft capsules and plain or coated tablets of any size. The flow of tablets from the hopper enters a vibrating perforated trough, where the sorting drum sifts coarse dust and chips, which are then collected in the container. The products arrive at the inspection platform in one layer. Capsules and tablets from the vibrating chute are moved to rotating rollers and, constantly turning over, move to the operator, who performs reliable comprehensive control. Adjustable mirrors allow the operator to check the opposite sides of tablets and capsules. The rotation speed of the inspection rollers is adjusted individually, regardless of the inspection speed. The rotation speed and control speed of tablets/capsules are smoothly…

Diphilic bases

8168

7634246

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Diphilic bases have a soft consistency and are easily distributed over the surface of the skin and mucous membranes. Diphilic bases are divided into two groups - absorption and emulsion. Absorption bases are hydrophobic. These are anhydrous compositions of hydrophobic bases with an emulsifier (surfactant), which have the ability to incorporate the aqueous phase to form an emulsion system of the water—oil type. Their composition most often includes mixtures of petroleum jelly, petroleum jelly oil, ceresine and other hydrocarbons with emulsifiers. Surfactants, which are part of the absorption bases, usually contribute to enhancing the therapeutic activity of ointments. Absorption Diphilic bases can be divided into two groups: Diphilic bases consisting of hydrocarbons and emulsifiers (surfactants) of the water—oil type (vaseline and lanolin or wool wax...

Dosing (filling) with screw and vacuum dosing units

8269

7635258

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Dosing (packing) of powders is carried out with the help of special dispensers, mainly screw and vacuum, working on the volumetric principle. Volumetric dispensers are easy to set up, simple to operate, and provide a capacity of up to 300 doses per minute. With a decrease in the dose of the medecines and an increase in the dosage rate, the error increases. Use special dispensers designed for volumetric dosing of bulk medecines in doses from 0.1 to 2 g. Based on the requirements of the GF, deviations in the mass of powders should not exceed certain values. Working principle: the powder is loaded into a hopper. With the help of a regulator, it is fed by a guide agitator through a throttle valve down into...

Automatic powder bottle filling machine PR-15

2379

7576359

• 
• 
• 
• 
• 

Automatic equipment for metered packing of powders and granules into plastic bottles and capping with lids. Auto feeding of empty bottles and lids from bins. The dosage is adjusted by screw dispensers of powders. The capacity of 1800 bottles per hour. Weight 550 kg. Made of high-quality stainless steel. We provide detailed instructions for setting up equipment for dosing and capping. User manual and technical data sheet in English. Before sending to the customer, the machines are checked and tested in production. Completeness and operability are guaranteed. We maintain a stock of parts and consumables in stock. The price is based on delivery to the buyer’s city.

Short-wave infrared sterilizer-dryer ZXP-GM

9188

7644451

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Short-wave sterilizer-drying based on infrared radiation ZXP-GM is used for drying vials for medical liquids and glass bottles for oral liquids. The structure of the machine is a tunnel with a preheating section, a heating and sterilization section and a cooling section. Under the influence of infrared radiation, medical containers are sterilized within a short time. Preset parameters of heating and operation processes. A complete 100-class laminar flow cleaning system, at the air intake and cooling stage, the laminar flow is protected from the penetration of outside air into the machine. Using the sprocket mechanism for delivery. complies with GMP standard.

Pellet coating laboratory equipment CJM-3

9189

7644458

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Laboratory equipment for coating granules is a multifunctional device for coating a group of tablets or granules by spraying tangentially, upper spraying and lower spraying during granulation in a fluidized bed. It is used in the field of product development and research, education, science and other industries. This new patented equipment, developed and manufactured on the basis of advanced foreign technologies, integrates several functions for pelletizing and coating by spray tangentially, pelletizing and coating by top spray, coating, mixing, drying by bottom spray. The equipment takes up little space and is easy to maintain. The machine is controlled by a touch screen that allows automatic saving and printing of data. User manual and technical data sheet in English. Completeness and operability are guaranteed. We maintain a…

Pellet coating laboratory equipment CJM-2

9189

7644461

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Laboratory equipment for coating granules is a multifunctional device for coating a group of tablets or granules by spraying tangentially, upper spraying and lower spraying during granulation in a fluidized bed. It is used in the field of product development and research, education, science and other industries. This new patented equipment, developed and manufactured on the basis of advanced foreign technologies, integrates several functions for pelletizing and coating by spray tangentially, pelletizing and coating by top spray, coating, mixing, drying by bottom spray. The equipment takes up little space and is easy to maintain. The machine is controlled by a touch screen that allows automatic saving and printing of data. User manual and technical data sheet in English. Completeness and operability are guaranteed. We maintain a…