EQUIPMENT FOR THE PRODUCTION OF TABLETS

Mechanical tablet press PP-15

10626

7684622

• 
• 
• 

Automatic mechanical tablet press for the chemical and food industries, powder metallurgy for the production of non-standard tablets, briquettes and boluses from bulk powder materials. It is used to produce tablets with a diameter of 10 to 50 mm, tablet height up to 35 mm. The maximum depth of powder filling into the matrix is ​​70 mm. This model of the press allows you to press tablets of various shapes: classic, oval, figured tablets and rings with an internal hole. Maximum pressure of 15 tons. Suitable for producing tablets with logos. We provide detailed instructions for setting up the press and producing tablets. Before sending to the customer, the press is checked and tested at the factory. Completeness and operability are guaranteed. The press is…

Mechanical tablet press PP-12

10626

7684621

• 
• 
• 

Automatic mechanical tablet press for the chemical and food industries, powder metallurgy for the production of non-standard tablets, briquettes and boluses from bulk powder materials. It is used to produce tablets with a diameter of 10 to 40 mm, tablet height up to 25 mm. The maximum depth of powder filling into the matrix is ​​50 mm. This model of the press allows you to press tablets of various shapes: classic, oval, figured tablets and rings with an internal hole. Maximum pressure of 12 tons. Suitable for producing tablets with logos. We provide detailed instructions for setting up the press and producing tablets. Before sending to the customer, the press is checked and tested at the factory. Completeness and operability are guaranteed. The press is…

Single-punch Tablet Press DP-30

2300

7601362

• 
• 
• 
• 
• 
• 
• 
• 

Single-punch tablet press of eccentric type. The maximum diameter of the finished tablets is 20 mm. The capacity of 3600 tablets per hour. Made of stainless steel. The pressing force is 3 tons. Suitable for the release of tablets with logos. We provide detailed instructions for setting up the press and manufacturing tablets. User manual and technical data sheet in English. Before sending the press to the customer, it is checked and tested in production. Completeness and operability are guaranteed. We maintain a stock of parts and consumables in stock. Reliable and modern model of high quality performance.

Single-punch Tablet Press UNIC-600B

2300

7601361

• 
• 
• 

A modern development for pressing tablets with a maximum diameter of 30 mm with the possibility of using one pair of punches. The tablet press is made entirely of stainless steel. There is access to all parts of the press from all sides. The working area is covered with transparent plastic shields. Unlike other laboratory presses, the force is transmitted through a gearbox, without inertial flywheels. This model of the press allows you to produce tablets of various shapes: classic, oval, shaped tablets and rings with an inner hole. Increased maximum pressure of 8 tons. Suitable for the release of tablets with logos. We provide detailed instructions for setting up the press and manufacturing tablets. User manual and technical data sheet in English. Before sending…

Single-punch tablet press 6000-S

2298

7601341

• 
• 
• 
• 
• 
• 
• 

The tablet press for the production of tablets in laboratories of pharmaceutical enterprises, in educational institutions, is ideal for the organization of a mobile workshop. It works in “automatic” mode and in manual mode. The tablet press is easy to set up and operate for the entire period of its use. Obtaining different diameters of tablets is provided by using replaceable sets of press tools (punches and matrices). The range of diameters of finished tablets from 5 mm to 13 mm. Tablet shape: flat-cylindrical, with a risk and a chamfer, hemispherical 3 depths (small, medium, deep sphere). It is possible to produce tablets with logos engraved. User manual and technical data sheet in English. We provide detailed instructions for setting up the press and manufacturing…

Tablet press UNIC 600A

2300

7601358

• 
• 
• 

A modern development for pressing tablets with a maximum diameter of 25 mm with the possibility of using 1,2,3 punches. The tablet press is made entirely of stainless steel. There is access to all parts of the press from all sides. The working area is covered with transparent plastic shields. Unlike other laboratory presses, the force is transmitted through a gearbox, without inertial flywheels. This model of the press allows you to produce tablets of various shapes: classic, oval, shaped tablets and rings with an inner hole. Increased maximum pressure of 5 tons. Suitable for the release of tablets with logos. We provide detailed instructions for setting up the press and manufacturing tablets. User manual and technical data sheet in English. Before sending the tablet…

Tablet press UNIC 600

2299

7601354

• 
• 
• 

A modern development for pressing 1 tablet. The tablet press is made entirely of stainless steel. There is access to all parts of the press from all sides. The working area is covered with transparent plastic shields. Unlike other laboratory presses, the force is transmitted through a gearbox, without inertial flywheels. This model of the press allows you to produce tablets of various shapes: classic, oval, shaped tablets and rings with an inner hole. Increased maximum pressure of 5 tons. Suitable for the release of tablets with logos. We provide detailed instructions for setting up the press and manufacturing tablets. User manual and technical data sheet in English. Before sending the counter to the customer, it is checked and tested in production. Completeness and operability…

Single-punch tablet press SP-01

2302

7601376

• 
• 
• 
• 
• 
• 
• 

Tablet press for pharmaceutical, chemical and food industries, in powder metallurgy for the production of tablets, briquettes and boluses from bulk powder materials. It is used for the production of tablets with a diameter of 6 to 40 mm, the height of tablets up to 12 mm. The maximum depth of filling the powder into the matrix is 20 mm. This model of the press allows you to produce tablets of various shapes: classic, oval, shaped tablets and rings with an inner hole. Increased maximum pressure of 2.5 tons. Suitable for the release of tablets with logos. We provide detailed instructions for setting up the press and manufacturing tablets. Before sending the press to the customer, it is checked and tested in production. User manual…

Single-punch tablet press SP-02

2303

7601387

• 
• 
• 
• 
• 
• 
• 

Tablet press for pharmaceutical, chemical and food industries, in powder metallurgy for the production of tablets, briquettes and boluses from bulk powder materials. It is used for the production of tablets with a diameter of 6 to 50 mm, the height of tablets up to 25 mm. The maximum depth of filling the powder into the matrix is 40 mm. This model of the press allows you to produce tablets of various shapes: classic, oval, shaped tablets and rings with an inner hole. Increased maximum pressure of 4 tons. Suitable for the release of tablets with logos. We provide detailed instructions for setting up the press and manufacturing tablets. User manual and technical data sheet in English. Before sending the press to the customer, it…

Pneumatic tablet press ITA-06

2303

7601388

• 
• 
• 
• 
• 
• 
• 
• 

Laboratory automatic pneumatic tablet press for the pharmaceutical, chemical and food industries, in powder metallurgy for the production of tablets, briquettes and boluses from bulk powder materials. It is used for the production of tablets with a diameter of 6 to 15 mm, the height of tablets up to 10 mm. The maximum depth of filling the powder into the matrix is 20 mm. This model of the press allows you to produce tablets of various shapes: classic, oval, shaped tablets and rings with an inner hole. Increased maximum pressure of 2.2 tons. Suitable for the release of tablets with logos. We provide detailed instructions for setting up the press and manufacturing tablets. Before sending the press to the customer, it is checked and tested…