EQUIPMENT WITH REVIEWS

Technologies and equipment for ointment production

7795

6495188

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The process of making ointments can be periodic or continuous. The periodic process can be one-, two-, three-stage, etc., depending on the number of devices in which separate stages of the process of obtaining ointments are consistently carried out. The technology of manufacturing ointments at pharmaceutical enterprises is carried out in accordance with the regulations. It includes the following stages: sanitary treatment of premises and equipment; preparation of raw materials (medicinal substances, ointment base, packaging containers, etc.); introduction of medicinal substances into the base; homogenization of ointments; standardization; packing and storage of ointments. Sanitary treatment of premises and equipment is aimed at preventing microbial contamination during the production, storage and transportation of ointments, at creating safe working conditions and protecting the health of workers.

Storage of ointments in cosmetic production

7795

6495189

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The terms and conditions of storage of ointments are determined by technical documentation. Factory-made ointments are stored in a cool, protected from light place from six months to two years or more. The storage conditions of ointments should be strictly observed. Environmental factors, especially temperature changes and light, often adversely affect the quality of ointments.

Technologies and equipment for the production of soft dosage forms

7832

6495556

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The process of making ointments can be periodic or continuous. The periodic process can be one-, two-, three-stage, etc., depending on the number of devices in which separate stages of the process of obtaining ointments are consistently carried out. The technology of manufacturing ointments at pharmaceutical enterprises is carried out in accordance with the regulations. It includes the following stages: sanitary treatment of premises and equipment; preparation of raw materials (medicinal substances, ointment base, packaging containers, etc.); introduction of medicinal substances into the base; homogenization of ointments; standardization; packing and storage of ointments. Sanitary treatment of premises and equipment is aimed at preventing microbial contamination during the production, storage and transportation of ointments, at creating safe working conditions and protecting the health of workers.

Automatic tube filling machine for plastic laminated metal tubes CYM-8F

8820

6505431

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Automatic tube filling machine in plastic, laminated, metal tubes with internal type heating applied to plastic, laminated and metal tubes. The tube is automatically pressed into the tube holder. The adapted flexible tube holder creates a tensile force that guarantees consistent high-quality sealing of the tube. Automatic adjustment systems of color marking by step-by-step actuation of the tube holder are adapted for oval or profile tubes. The manual transmission of the loading system provides a stable load capacity. The original Swiss LEISTER heating element. The inner surface of the tube is sealed with hot air, while the outer surface is cooled by circulating cooling water, which gives an excellent effective sealing. Fan (made in Taiwan) releases toxic gas generated during heating, outdoors. After sealing the tube,…

Automatic tube filling machine for plastic and laminated tubes CYM-8E

8820

6505432

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Automatic tube filling machine in plastic and laminated tubes CYM-8E with internal type heating applied to plastic and laminated tubes. The tube is automatically pressed into the tube holder. The adapted flexible tube holder creates a tensile force that guarantees consistent high-quality sealing of the tube. Automatic adjustment systems of color marking by step-by-step actuation of the tube holder are adapted for oval or profile tubes. The manual transmission of the loading system provides a stable load capacity. The original Swiss LEISTER heating element. The inner surface of the tube is sealed with hot air, while the outer surface is cooled by circulating cooling water, which gives an excellent effective sealing. Fan (made in Taiwan) releases toxic gas generated during heating, outdoors. After sealing the…

Packaging equipment for pills or hot wrapping of hookah tobacco BD-17

8822

6505452

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Packaging equipment for tablets or hot tobacco wrapping for hookah – a packaging machine with a microcomputer – is used for packaging tablets, capsules, pills, chewing gum, etc., and performs the following cycle of operations: the measurement process, bag formation, powder filling, bag sealing, batch number printing and cutting can be performed automatically mode. The equipment can pack various types of materials, such as granules, powders, liquids, tablets, etc. Equipped with a processor to control each operating function and configure the human-machine interface dialog. The dual temperature channel is controlled horizontally and vertically by an intelligent temperature control device. An intelligent self-regulating photocell discreetly transforms the orientation between light and shadow. Powerful anti-interference protection gives an alarm signal if two packets are delayed at the highest…

Automatic plastic laminated metal tube filling machine CYM-6B

8822

6505455

• 
• 
• 
• 
• 

Automatic tube filling machine in plastic laminated metal tubes with internal type heating applied to plastic, laminated and metal tubes. The tube is automatically pressed into the tube holder. The adapted flexible tube holder creates a tensile force that guarantees consistent high-quality sealing of the tube. Automatic adjustment systems of color marking by step-by-step actuation of the tube holder are adapted for oval or profile tubes. The manual transmission of the loading system provides a stable load capacity. The original Swiss LEISTER heating element. The inner surface of the tube is sealed with hot air, while the outer surface is cooled by circulating cooling water, which gives an excellent effective sealing. Fan (made in Taiwan) releases toxic gas generated during heating, outdoors. After sealing the tube,…

PACKAGING OF POWDERED PHARMACEUTICAL SUBSTANCES

8683

6504068

• 
• 
• 
• 
• 
• 
• 
• 

Powders are packed in the following materials. Paper capsules. For their manufacture, the following are used: glued paper is a cellulose mass with a glued layer of animal glue. Such paper is mainly used for packaging hygroscopic and non—volatile powders; waxed and paraffin paper is glued paper impregnated with wax or paraffin. Since it does not allow moisture and gases to pass through, it is used for packaging hygroscopic substances (euphyllin), as well as substances that change under the influence of oxygen in the air and carbon dioxide. Such packaging is not suitable for camphor and menthol, which dissolve in wax and paraffin. In paraffin paper capsules, substances such as analgin, glucose, dibazole, diphenhydramine, etc. are released; parchment paper is obtained from non—glued paper treated…

Automatic tube filling machine for plastic laminated metal tubes CYM-6F

8819

6505423

• 
• 
• 
• 
• 

Automatic tube filling machine in plastic, laminated, metal tubes with external type heating applied to plastic, laminated and metal tubes. The tube is automatically loaded into the desired position and automatically pressed into the tube holder. Automatic adjustment systems of color marking by step-by-step actuation of the tube holder are adapted for oval or profile tubes. The manual transmission of the loading system provides a stable load capacity. After sealing the tube, the air cooling system prevents heating of the packaged ointment-like products. PLC automatic control system. The case is made of high-quality stainless steel. The machine can be connected with an emulsifier, a cartoning machine, a filling machine, etc. to create a production line. This model is easy to operate using tubes of various diameters….

Automatic tube filling machine for plastic and laminated tubes CYM-6C

8819

6505425

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Automatic tube filling machine in plastic and laminated tubes with external type heating applied to plastic and laminated tubes. The tube is automatically loaded into the desired position and automatically pressed into the tube holder. Automatic adjustment systems of color marking by step-by-step actuation of the tube holder are adapted for oval or profile tubes. The manual transmission of the loading system provides a stable load capacity. After sealing the tube, the air cooling system prevents heating of the packaged ointment-like products. PLC automatic control system. The case is made of high-quality stainless steel. The machine can be connected with an emulsifier, a cartoning machine, a filling machine, etc. to create a production line. This model is easy to operate using tubes of various diameters. Automatic…