PELLET PRODUCTION

Industrial powder pelletizing extruder CJM-10J

8998

6942277

• 
• 
• 
• 
• 
• 
• 

1. 1
2. 2
3. 3
4. 4
5. 5

• Previous
• Next

Extruder CJM-10J. Mixing of powder materials, fillers, uniform wet mixing to obtain loose or lumpy material. After starting the equipment, the screw feeder feeds the flow of materials into the extrusion chamber, where it is forced through the sorting sieve by an extruder and, finally, a compact cylindrical extrudate of various lengths is formed. This machine consists of motor, gearbox, transmission mechanism, gate chamber, screw charger, screen, cover, control system, bracket, etc. The grid of the plate of various diameters (0.4 mm – 3.0 mm) allows to achieve the cylindrical shape of the extrudate of various diameters. Uniform extrusion, good density, high final coefficient. High production efficiency, the ability to supply material for multiple spheronizers. Radial twin-screw extrusion, low pressure on the material, the possibility…

CJM-5J industrial powder pelletizing extruder

8999

6942281

• 
• 
• 
• 
• 
• 
• 

1. 1
2. 2
3. 3
4. 4
5. 5

• Previous
• Next

Extruder CJM-5J. Mixing of powder materials, fillers, uniform wet mixing to obtain loose or lumpy material. After starting the equipment, the screw feeder feeds the flow of materials into the extrusion chamber, where it is forced through the sorting sieve by an extruder and, finally, a compact cylindrical extrudate of various lengths is formed. This machine consists of motor, gearbox, transmission mechanism, gate chamber, screw charger, screen, cover, control system, bracket, etc. The grid of the plate of various diameters (0.4 mm – 3.0 mm) allows to achieve the cylindrical shape of the extrudate of various diameters. Uniform extrusion, good density, high final coefficient. High production efficiency, the ability to supply material for multiple spheronizers. Radial twin-screw extrusion, low pressure on the material, the possibility…

Industrial powder pelletizing extruder CJM-8J

8999

6942279

• 
• 
• 
• 
• 
• 
• 

1. 1
2. 2
3. 3
4. 4
5. 5

• Previous
• Next

Extruder CJM-8J. Mixing of powder materials, fillers, uniform wet mixing to obtain loose or lumpy material. After starting the equipment, the screw feeder feeds the flow of materials into the extrusion chamber, where it is forced through the sorting sieve by an extruder and, finally, a compact cylindrical extrudate of various lengths is formed. This machine consists of motor, gearbox, transmission mechanism, gate chamber, screw charger, screen, cover, control system, bracket, etc. The grid of the plate of various diameters (0.4 mm – 3.0 mm) allows to achieve the cylindrical shape of the extrudate of various diameters. Uniform extrusion, good density, high final coefficient. High production efficiency, the ability to supply material for multiple spheronizers. Radial twin-screw extrusion, low pressure on the material, the possibility…

Industrial spheronizer for pellets CJM-25

8998

6942273

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

1. 1
2. 2
3. 3
4. 4
5. 5
6. 6
7. 7
8. 8
9. 9
10. 10

• Previous
• Next

An industrial spheronizer for the production of granules. The cutting teeth on the centrifugal rotary platform, when rotating at high speed, cut the incoming cylindrical strip material (strip) into a short cylindrical granulate of a certain length (in proportion to the diameter of the column). Due to the combined action of the centrifugal force of the rotary platform, the friction force between the granules and the toothed plate, the walls of the container and the granules, as well as the air pressure force between the rotary plate and the walls of the container, all the granules are in a three-dimensional transverse-helical rolling motion, forming a smooth grinding action and converting the granulate into spheroids. The machine consists of a loading chute, groove, rotary plate, unloading device,…

Industrial spheronizer for granules CJM-45

8998

6942272

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

1. 1
2. 2
3. 3
4. 4
5. 5
6. 6
7. 7
8. 8

• Previous
• Next

An industrial spheronizer for the production of granules. The cutting teeth on the centrifugal rotary platform, when rotating at high speed, cut the incoming cylindrical strip material (strip) into a short cylindrical granulate of a certain length (in proportion to the diameter of the column). Due to the combined action of the centrifugal force of the rotary platform, the friction force between the granules and the toothed plate, the walls of the container and the granules, as well as the air pressure force between the rotary plate and the walls of the container, all the granules are in a three-dimensional transverse-helical rolling motion, forming a smooth grinding action and converting the granulate into spheroids. The machine consists of a loading chute, groove, rotary plate, unloading device,…