PHARMA

Basic requirements of gmp soft dosage forms

7858

6584352

• 
• 
• 
• 
• 
• 
• 

In the production of ointments, creams and other soft dosage forms, there is a particularly high risk of microbial and other contamination. Therefore, special measures are needed to prevent any contamination. Soft dosage forms have specific rheological properties and in most cases are heterogeneous dispersed systems. Therefore, in order to avoid heterogeneity of the product due to uneven distribution of components, formation of gas emulsions and destabilization of dispersed systems, special attention should be paid to the proper conduct of the technological process, the equipment used and the temperature conditions of product storage. Requirements for production facilities and equipment. The environment of the premises, taking into account all measures to protect production, should pose a minimal risk in terms of contamination of materials and products.

Rotary tableting machines

7915

6584920

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Rotary tablet machines (RTM), unlike eccentric ones, have a large number of matrices and punches. The matrices are mounted in a rotating matrix table. The pressure in the RTM increases gradually, which ensures a soft and uniform pressing of the tablets. rTMS have high productivity (up to 0.5 million tablets per hour). The technological cycle of tableting on RTM consists of a number of sequential operations: Filling the matrices with tableted material (volumetric dosing method). Actually pressing. Ejection. Dropping pills. The operations are performed sequentially in automatic mode. The upper and lower punches slide along the guides (caps) and pass between the pressing rollers, exerting simultaneous pressure on them. The pressure increases and decreases gradually, which leads to uniform and soft pressing of the tablet…

Powder production operations and equipment used

7941

6585183

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The technological scheme of powder production includes the following operations: grinding, sieving, mixing (in the manufacture of complex powders), dosing (packing) and packaging. The need to perform certain technological operations depends on the prescription, medical purpose and type of starting preparations. If the starting materials (medicinal and auxiliary substances) do not meet the required fractional composition specified in the regulations, they are crushed. Grinding refers to the mechanical process of dividing pieces of solids into smaller ones or turning them into powder, as a result of which the surface of the processed material increases significantly, which significantly accelerates the dissolution of medicinal substances. The goals of grinding are as follows: to provide a rapid therapeutic effect by reducing the particle size and increasing the amount…

Hydraulic desktop manual press R-40-1

8710

6592876

• 
• 
• 
• 
• 
• 

Laboratory hydraulic press with a pressing force of 40 tons. The desktop model is used in industry for the production of chemical products, briquettes and tablets in powder metallurgy. Laboratory automatic hydraulic tablet press for the pharmaceutical, chemical and food industries, in powder metallurgy for the production of tablets, briquettes and boluses from bulk powder materials with a diameter from 10 mm to 100 mm. The press works in manual mode. The maximum depth of filling the powder into the matrix is 150 mm. This model of the press allows you to produce tablets of various shapes: classic, oval, shaped tablets and rings with an inner hole. We provide detailed instructions for setting up the press and manufacturing tablets. Before sending the press to the…

Pillow bagging machine BD-27

8853

6594300

• 
• 
• 
• 
• 

The equipment for packing into a bag of the “pillow” is used for packaging liquids and viscous substances such as syrups, honey, jam, ketchup, shampoo, liquid pesticides, etc., and performs the following cycle of operations: measuring process, bag formation, powder filling, bag sealing, batch number printing and cutting can run in automatic mode. The equipment can pack various types of materials, such as granules, powders, liquids, tablets, etc. in various packaging materials: a variety of laminated films, such as polypropylene/polyethylene, polyester/aluminum foil/polyethylene, polyester/aluminum coating/polyethylene, nylon/polyethylene, polyester/polyethylene. Equipped with a processor to control each operating function and configure the human-machine interface dialog. The dual temperature channel is controlled horizontally and vertically by an intelligent temperature control device. An intelligent self-regulating photocell discreetly transforms the orientation between light…

Equipment for packing pellets into pillow type bag BD-25

8853

6594302

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The equipment for packing powder into a bag of the “pillow” type BD-25 is used for packing such fine-grained material as sugar, coffee, mini pellets, fructose, tea, sodium glutamate, salt, desiccant, seeds, etc., and performs the following cycle of operations: measuring process, forming a bag, filling with powder, sealing the bag, batch number printing and cutting can be performed automatically. The equipment can pack various types of materials, such as granules, powders, liquids, tablets, etc. in various packaging materials: a variety of laminated films, such as polypropylene/polyethylene, polyester/aluminum foil/polyethylene, polyester/aluminum coating/polyethylene, nylon/polyethylene, polyester/polyethylene. Equipped with a processor to control each operating function and configure the human-machine interface dialog. The dual temperature channel is controlled horizontally and vertically by an intelligent temperature control device. An intelligent…

Programmable powder filling equipment BD-45

8853

6594303

• 
• 
• 
• 
• 

The BD-45 programmable powder packaging equipment is used for packaging milk powder, soy powder, seasonings, pesticides in the form of wet powder, etc. The measurement process, bag formation, powder filling, bag sealing, batch number printing and cutting can be performed automatically. The equipment can pack various types of materials, such as granules, powders, liquids, tablets, etc. in various packaging materials: a variety of laminated films, such as polypropylene/polyethylene, polyester/aluminum foil/polyethylene, polyester/aluminum coating/polyethylene, nylon/polyethylene, polyester/polyethylene. Equipped with a processor to control each operating function and configure the human-machine interface dialog. The dual temperature channel is controlled horizontally and vertically by an intelligent temperature control device. An intelligent self-regulating photocell discreetly transforms the orientation between light and shadow. Powerful anti-interference protection gives an alarm signal if two…

Equipment for packing powder into a bag type pillow BD-28

8853

6594304

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The equipment for packing powder into a bag of the “pillow” type is used for packaging milk powder, soy powder, seasonings, pesticides in the form of wet powder, etc. and performs the following cycle of operations: the measurement process, bag formation, powder filling, bag sealing, batch number printing and cutting can be performed automatically. The equipment can pack various types of materials, such as granules, powders, liquids, tablets, etc. in various packaging materials: a variety of laminated films, such as polypropylene/polyethylene, polyester/aluminum foil/polyethylene, polyester/aluminum coating/polyethylene, nylon/polyethylene, polyester/polyethylene. Equipped with a processor to control each operating function and configure the human-machine interface dialog. The dual temperature channel is controlled horizontally and vertically by an intelligent temperature control device. An intelligent self-regulating photocell discreetly transforms the orientation between…

Mixing screw filling equipment SZP-13

8853

6594306

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Mixing screw filling equipment is supplied to provide continuous controlled automatic feeding of powders or granules for various types of packaging and pharmaceutical machines. User manual and technical data sheet in English. Completeness and operability are guaranteed. We maintain a stock of parts and consumables in stock. The price is based on delivery to the buyer’s city.

Semi-automatic filling equipment for pellets SZP-12

8854

6594307

• 
• 
• 
• 
• 

Semi-automatic filling equipment for granules is designed for packing granulate in food, pharmaceutical, chemical, etc. industries. User manual and technical data sheet in English. Completeness and operability are guaranteed. We maintain a stock of parts and consumables in stock. The price is based on delivery to the buyer’s city.