Automatic plastic bottle conveyor feeding machine “FT-01”
Types: round bottles, flat bottles, square bottles.
Characteristics: plastic bottles 15-300 ml
Capacity: maximum 150 bottles per minute
Bottle throughput: ≥ 99%
Compressed air pressure: ≤ 0.4 ~ 0.6 MPa
Air flow rate: 15 m3 per hour
Power supply: 220V, 50Hz
Power: 0.2 kW
Noise level: ≤50 dB
Overall dimensions : 1065mm x 1510mm x 1230mm
Weight : 200 kg
Weight with packing: 250 kg

The machine for orientation and feeding of plastic bottles is a part of the automatic line for packing tablets and gelatin capsules into plastic bottles with sealing the necks of bottles with aluminum membranes, sealing with caps, sticking self-adhesive labels. A rotating table feeds empty plastic bottles and vials piece by piece on a conveyor belt, which moves the vials to the filling unit. From the storage hoppers the vials are fed to the rotary table, where the vials fall into the cells and are moved to the outlet, where they are taken away by an additional conveyor belt to the lines for filling tablets and gelatin capsules. Orientation of bottles with the neck upwards is carried out by blowing compressed air through the nozzle. If the bottle is turned upside down, the compressed air stream passing under the nozzle ejects the bottle from the cell. Bottles and vials are poured into the storage hopper in bulk. A plastic disk with cells is placed inside; a different disk is ordered for each bottle diameter and height.