Automatic rotary tablet press “RZ-17”
Number of press tools: 17 pairs
Main compression force: 60KN (6000 kg/cm2)
Pre-pressing: no
Maximum diameter of tablets: 20 mm
Depth of powder filling into the die: 15 mm
Maximum tablet height: 6 mm
Adjustable rotor speed: 30 revolutions per minute
Capacity: 30600 tablets per hour
Electric motor: 3 kW, 940 rpm, 380V
Overall dimensions: 890mm × 620mm × 1500mm
Weight: 1000 kg (with packing 1100 kg)

Automatic tablet press machine for pressing powders and tablet mixtures in batch batches of tablets. The rotary tablet press is easy to set up. Model RZ-17 is a carousel type rotary press. The principle of operation of the press is to transfer, by means of a gearbox, the rotation from the electric motor to the pulley, on the axis of which the rotor is located. The rotary tablet press is designed for pressing tablets from prepared tablet mass. The productivity is adjustable up to 30600 tablets per hour, the larger the diameter of tablets, the lower the speed of pressing. Complete with molds: dies of different diameters (from 6 to 20 mm) and punches. Punches with a long body are upper and installed in the upper part of the press. Punches with short body and long working part are lower and their task is to push the tablet out of the die. They are installed in the lower part of the press. The press operates in automatic mode. Before plugging the press into the network and starting work, it is necessary to carefully study the video instruction and familiarize yourself with the principles of its operation. After that, its operation will become clear and simple for you. The press has an electric motor, as well as a debugging wheel with a handle. All adjustments and settings are made manually by turning the wheel. Be careful when connecting the electric motor, the direction must correspond to the arrow. The powder is loaded into the press through a funnel-shaped hopper. It can be easily removed, rinsed and reinstalled. The powder is fed from the hopper via a feeder. An active feeder with forced powder feeding into the die is also available. When the rotor of the press rotates, the powder is fed into the die, where it is pressed and then the finished tablet is pushed to the surface. On the body of the press there is a control unit. We can produce any sets of press tools (punches and dies for rotary tablet presses).