QUALITY CONTROL EQUIPMENT FOR TABLETS, GELATIN CAPSULES, GLASS AMPOULES

Vial visual inspection equipment VIM-09

9465

8537855

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Vials visual inspection equipment is used in the pharmaceutical industry for visual inspection of ampoules, vials, cartridges, pre-filled syringes, etc. The product comes from the filling system and is lined up on the control conveyor. The inspection machine has two independent control systems - conveyor and rotary. The conveyor system transfers the bottles to the rotating shafts and pushes them forward along the conveyor. The rotary system controls the movement of the shafts, respectively transmitting rotation to the bottles. The high rotation speed of the filled bottles raises the macroparticles in the liquid. When the bottles pass through the darkened inspection booth in front of the operator, a concentrated beam of light from the halogen lighting system is refracted from the solid particles and causes them to glow like a small bulb (Tyndall effect), which makes these particles easily visible. In addition, the inspection machine is equipped with mirrors and a magnifying lens, which allow the operator to inspect the entire external surface of the product, so that micro-cracks and cosmetic defects can be detected in the area of the bottom, flange or lid. Products with a defect are...

Сapsules and tablets quality control machine IM-015

9461

8537820

• 
• 
• 
• 
• 

The quality control machine with rotating rollers allows the operator to control hard or soft capsules and plain or coated tablets of any size. The flow of tablets from the hopper enters a vibrating perforated trough, where the sorting drum sifts coarse dust and chips, which are then collected in the container. The products arrive at the inspection platform in one layer. Capsules and tablets from the vibrating chute are moved to rotating rollers and, constantly turning over, move to the operator, who performs reliable comprehensive control. Adjustable mirrors allow the operator to check the opposite sides of tablets and capsules. The rotation speed of the inspection rollers is adjusted individually, regardless of the inspection speed. The rotation speed and control speed of tablets/capsules are smoothly adjustable. No hidden corners and "blind spots" on the inspection platform. The inspection rollers are made of high-density transparent polymers with FDA food tolerance. The lighting is installed under a roller conveyor, which is more suitable for inspection of transparent hard and soft capsules. Defective capsules and tablets can be removed by the operator using a flexible manual d...

Tablet sorting and quality control equipment TST-25

9471

8537916

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Equipment for sorting and quality control of tablets (plain or wrapped) on both sides. A sorting machine with a tablet flip system will allow your operator to reliably check up to 50 kg of tablets per hour on both sides. The basic TST-25 machine can be equipped with a number of accessories to meet your individual needs, i.e. calibrated luminaires above the inspection area. Tablets with defects can be removed by the operator using a flexible manual device with a vacuum nozzle. The flow of tablets from the hopper enters a vibrating perforated trough, where coarse dust and chips are sifted, which is then collected in the container. The products arrive at the inspection platform in one layer. The tablets are placed on a conveyor belt made of FDA food-approved material and are checked by the operator of the upper part. A special system reliably and smoothly turns over and transports the products to the second operator to check the lower part of the product. During the verification stages, the tablets lie on the conveyor without movement and vibration. Any possibility of contamination of the product from the friction of belts or chains is excluded. There are no open oiled nodes or chains...