PHARMA

Technologies and equipment for ointment production

7794

6492351

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The process of making ointments can be periodic or continuous. The periodic process can be one-, two-, three-stage, etc., depending on the number of devices in which separate stages of the process of obtaining ointments are consistently carried out. The technology of manufacturing ointments at pharmaceutical enterprises is carried out in accordance with the regulations. It includes the following stages: sanitary treatment of premises and equipment; preparation of raw materials (medicinal substances, ointment base, packaging containers, etc.); introduction of medicinal substances into the base; homogenization of ointments; standardization; packing and storage of ointments. Sanitary treatment of premises and equipment is aimed at preventing microbial contamination during the production, storage and transportation of ointments, at creating safe working conditions and protecting the health of workers.

Storage of ointments in cosmetic production

7794

6492352

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The terms and conditions of storage of ointments are determined by technical documentation. Factory-made ointments are stored in a cool, protected from light place from six months to two years or more. The storage conditions of ointments should be strictly observed. Environmental factors, especially temperature changes and light, often adversely affect the quality of ointments.

Technologies and equipment for the production of soft dosage forms

7831

6492719

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The process of making ointments can be periodic or continuous. The periodic process can be one-, two-, three-stage, etc., depending on the number of devices in which separate stages of the process of obtaining ointments are consistently carried out. The technology of manufacturing ointments at pharmaceutical enterprises is carried out in accordance with the regulations. It includes the following stages: sanitary treatment of premises and equipment; preparation of raw materials (medicinal substances, ointment base, packaging containers, etc.); introduction of medicinal substances into the base; homogenization of ointments; standardization; packing and storage of ointments. Sanitary treatment of premises and equipment is aimed at preventing microbial contamination during the production, storage and transportation of ointments, at creating safe working conditions and protecting the health of workers.

PACKAGING OF POWDERED PHARMACEUTICAL SUBSTANCES

8682

6501231

• 
• 
• 
• 
• 
• 
• 
• 

Powders are packed in the following materials. Paper capsules. For their manufacture, the following are used: glued paper is a cellulose mass with a glued layer of animal glue. Such paper is mainly used for packaging hygroscopic and non—volatile powders; waxed and paraffin paper is glued paper impregnated with wax or paraffin. Since it does not allow moisture and gases to pass through, it is used for packaging hygroscopic substances (euphyllin), as well as substances that change under the influence of oxygen in the air and carbon dioxide. Such packaging is not suitable for camphor and menthol, which dissolve in wax and paraffin. In paraffin paper capsules, substances such as analgin, glucose, dibazole, diphenhydramine, etc. are released; parchment paper is obtained from non—glued paper treated…

Automatic tube filling machine for plastic laminated metal tubes CYM-6F

8818

6502586

• 
• 
• 
• 
• 

Automatic tube filling machine in plastic, laminated, metal tubes with external type heating applied to plastic, laminated and metal tubes. The tube is automatically loaded into the desired position and automatically pressed into the tube holder. Automatic adjustment systems of color marking by step-by-step actuation of the tube holder are adapted for oval or profile tubes. The manual transmission of the loading system provides a stable load capacity. After sealing the tube, the air cooling system prevents heating of the packaged ointment-like products. PLC automatic control system. The case is made of high-quality stainless steel. The machine can be connected with an emulsifier, a cartoning machine, a filling machine, etc. to create a production line. This model is easy to operate using tubes of various diameters….

Automatic tube filling machine for plastic and laminated tubes CYM-6C

8818

6502588

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Automatic tube filling machine in plastic and laminated tubes with external type heating applied to plastic and laminated tubes. The tube is automatically loaded into the desired position and automatically pressed into the tube holder. Automatic adjustment systems of color marking by step-by-step actuation of the tube holder are adapted for oval or profile tubes. The manual transmission of the loading system provides a stable load capacity. After sealing the tube, the air cooling system prevents heating of the packaged ointment-like products. PLC automatic control system. The case is made of high-quality stainless steel. The machine can be connected with an emulsifier, a cartoning machine, a filling machine, etc. to create a production line. This model is easy to operate using tubes of various diameters. Automatic…

Automatic tube filling machine for aluminum and metal tubes CYM-6D

8818

6502589

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Automatic tube filling machine in aluminum and metal tubes can perform double or triple edge bending or saddle-shaped bending for aluminum and metal tubes. The tube is automatically loaded into the desired position and automatically pressed into the tube holder. The manual transmission of the loading system provides a stable load capacity. PLC automatic control system. The case is made of high-quality stainless steel. The machine can be connected with an emulsifier, a cartoning machine, a filling machine, etc. to create a production line. This model is easy to operate using tubes of various diameters. Automatic process of packing, sealing and printing the batch number in one machine. There are functions such as automatic feeding of tubes to the machine’s desktop, automatic adjustment of color…

Automatic tube filling machine for plastic and laminated tubes CYM-6A

8818

6502590

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Automatic tube filling machine in plastic and laminated tubes CYM-6A with external type heating applied to plastic and laminated tubes. The tube is automatically loaded into the desired position and automatically pressed into the tube holder. Automatic adjustment systems of color marking by step-by-step actuation of the tube holder are adapted for oval or profile tubes. The manual transmission of the loading system provides a stable load capacity. After sealing the tube, the air cooling system prevents heating of the packaged ointment-like products. PLC automatic control system. The case is made of high-quality stainless steel. The machine can be connected with an emulsifier, a cartoning machine, a filling machine, etc. to create a production line. This model is easy to operate using tubes of various…

Automatic tube filling machine for aluminum and metal tubes CYM-8D

8818

6502591

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The CYM-8D automatic tube filling machine in aluminum and metal tubes can perform double or triple edge bending or saddle-shaped bending for aluminum and metal tubes. The manual transmission of the loading system provides a stable load capacity. PLC automatic control system. The case is made of high-quality stainless steel. The machine can be connected with an emulsifier, a cartoning machine, a filling machine, etc. to create a production line. This model is easy to operate using tubes of various diameters. Automatic process of packing, sealing and printing the batch number in one machine. There are such functions as automatic feeding of tubes to the machine’s desktop, automatic purging (cleaning) of tubes, automatic adjustment of color markings in the tube holder, automatic filling of tubes…

Automatic tube filling machine for aluminum and metal tubes CYM-8Y

8818

6502592

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The automatic tube filling machine for aluminum and metal tubes can perform double or triple edge bending or saddle-shaped bending for aluminum and metal tubes. The manual transmission of the loading system provides a stable load capacity. PLC automatic control system. The case is made of high-quality stainless steel. The machine can be connected with an emulsifier, a cartoning machine, a filling machine, etc. to create a production line. This model is easy to operate using tubes of various diameters. Automatic process of packing, sealing and printing the batch number in one machine. There are such functions as automatic feeding of tubes to the machine’s desktop, automatic purging (cleaning) of tubes, automatic adjustment of color markings in the tube holder, automatic filling of tubes and sealing….