PHARMA

Classification of ointment bases

8314

8223251

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Ointments contain medicinal and auxiliary substances that should be evenly distributed in the dosage form. Excipients form a simple or complex base. Thus, the ointment base is the carrier of the medicinal substance. Depending on the composition, it can have an effect on the release, bioavailability and therapeutic effect of the medicinal substance. The bases provide the necessary mass of ointment, proper concentration of medicinal substances, soft consistency and have a significant impact on the stability of ointments. The degree of release of medicinal substances from ointments, the speed and completeness of their resorption largely depend on the nature and properties of the base. For example, an ointment of 2% boric acid on a consistent emulsion basis exhibits the same therapeutic activity as a similar...

Ointments, requirements for ointments and their classification

8315

8223254

• 
• 
• 
• 
• 
• 
• 

Of soft medicines for external use, ointments are most often used, which consist of an ointment base and a medicinal substance evenly distributed in it. Ointments are soft medicines for topical use, the dispersion medium of which, at a set storage temperature, has a non—Newtonian type of flow and high values of rheological parameters. They are highly viscous liquids capable of forming a smooth continuous film on the surface of the skin or mucous membrane. Ointments are the official dosage form intended for application to the skin, wound or mucous membranes. Despite the fact that ointments belong to the oldest medicinal forms mentioned in the Ebers papyrus, the works of Hippocrates, Galen and Avicenna, they have not lost their significance today, in modern medicine.

Shrink wrapping line for long products in film BSP-12

9339

8233497

• 
• 
• 
• 

The film shrink packaging line for long products is a rectilinear shrink packer – designed specifically for use in the field of building materials, it is used for packaging sound insulation boards, bricks, wooden floors and other boardwalks, as well as various other systematically supplied building materials. The materials packed in this way are easy to transport and store, the packaging gives a neat appearance, hydro and dust-proof properties, and also prevents fogging. It consists of several parts, each of which has both conventional legs and roller legs, convenient for moving and shipping. The double circular system (internal tunnel of constant heating, normal temperature of the outer shell) leads to resource savings and gives a good quality of shrinkage. The motor speed can be adjusted to…

Conveyor equipment for filling and packing multi material XY-6D

9346

8233570

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Conveyor equipment for packing and packaging of multi-material is used for packing seaweed, shallots, carrots and other dried vegetables, as well as instant noodles in the food industry. Sealing on the back of the package. All processes of bag making, dosing, filling, sealing, cutting and printing codes can be carried out automatically. The filling process is carried out using three plates and one conveyor. User manual and technical data sheet in English. Completeness and operability are guaranteed. We maintain a stock of parts and consumables in stock. The price is based on delivery to the buyer’s city.

Spraying tablet coating machine DK-43

2550

8165608

• 
• 
• 
• 

A coating machine with a movable automatic shell spraying system, which is used for applying polished organic shells, as well as shells based on sugar syrup and food polymers to tablets, pills, capsules, nuts, chewing gum. The DK-43 modification has a built-in shell spraying system. Additional purchase of a manual sprayer is required. Capacity 2-5 kg per hour, coating diameter 400 mm. Suitable for use in laboratory conditions and small-scale production of pills. Maximum mechanization of the manual process. Made of stainless steel according to GMP standards. User manual and technical data sheet in English. We provide detailed instructions for setting up equipment for coating with tablet shells. Before sending the equipment to the customer, it is checked and tested in production. Completeness and operability…

Linear filling and capping equipment JFY-8

9370

8233804

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Linear filling and capping equipment is a new generation machine of utilitarian products, developed on the basis of advanced technologies, meeting the modern needs of the market. The machine is equipped with SS316L piston pump dispenser, automatic placement and tightening of the lid. The cost-effective machine, which takes up little working space, is widely used for packaging liquids in the production of pesticides, in the chemical, pharmaceutical, food, cosmetic industries. Manufactured in accordance with GMP requirements. The piston pump dispenser provides high filling accuracy, is also suitable for filling viscous liquids. Structurally, the pump is easy to disassemble for cleaning and sterilization. The piston ring of the metering pump is made of various materials, such as silicone, polyflon or other, corresponding to the characteristics of liquids….

Linear air rinser for plastic and glass bottles JFQ-12

9370

8233805

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The linear air rinse of plastic and glass bottles is used for rinsing bottles with clean compressed air, which enters the bottle, rinses it from the inside, and then is sucked through another outlet. Since the machine is completely closed, powder, dust, water droplets and impurities in the bottle or on the walls of the bottle are blown out by air. Simple design, stable operation, easy operation and low maintenance cost. Equipped with a hydronium generator, neutralizes static electricity, effectively removes dust on the inner surface of bottles. The automatic conveyor is equipped with bottle indexing gates to control the movement of containers. No tools are required to change attachments or indexing gates. The process is controlled by a PLC controller and a human-machine interface….

Linear air rinser for plastic and glass bottles JFQ-8

9370

8233806

• 
• 
• 
• 
• 

The linear air rinse of plastic and glass bottles is used for rinsing bottles with clean compressed air, which enters the bottle, rinses it from the inside, and then is sucked through another outlet. Since the machine is completely closed, powder, dust, water droplets and impurities in the bottle or on the walls of the bottle are blown out by air. Simple design, stable operation, easy operation and low maintenance cost. Equipped with a hydronium generator, neutralizes static electricity, effectively removes dust on the inner surface of bottles. The automatic conveyor is equipped with bottle indexing gates to control the movement of containers. No tools are required to change attachments or indexing gates. The process is controlled by a PLC controller and a human-machine interface. The…

Linear air rinser for plastic and glass bottles JFQ-4

9370

8233807

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The linear air rinse of plastic and glass bottles is used for rinsing bottles with clean compressed air, which enters the bottle, rinses it from the inside, and then is sucked through another outlet. Since the machine is completely closed, powder, dust, water droplets and impurities in the bottle or on the walls of the bottle are blown out by air. Simple design, stable operation, easy operation and low maintenance cost. Equipped with a hydronium generator, neutralizes static electricity, effectively removes dust on the inner surface of bottles. The automatic conveyor is equipped with bottle indexing gates to control the movement of containers. No tools are required to change attachments or indexing gates. The process is controlled by a PLC controller and a human-machine interface. The…

Сapsules and tablets quality control machine IM-015

9370

8233808

• 
• 
• 
• 
• 

The quality control machine with rotating rollers allows the operator to control hard or soft capsules and plain or coated tablets of any size. The flow of tablets from the hopper enters a vibrating perforated trough, where the sorting drum sifts coarse dust and chips, which are then collected in the container. The products arrive at the inspection platform in one layer. Capsules and tablets from the vibrating chute are moved to rotating rollers and, constantly turning over, move to the operator, who performs reliable comprehensive control. Adjustable mirrors allow the operator to check the opposite sides of tablets and capsules. The rotation speed of the inspection rollers is adjusted individually, regardless of the inspection speed. The rotation speed and control speed of tablets/capsules are smoothly…