PHARMA

Liquid filling and packaging equipment BD-40

9220

7703050

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Liquid filling and packaging equipment is used for packaging various types of liquid and viscous substances, such as syrup, honey, jam, ketchup, shampoo, liquid pesticides, etc. in the food, medical industries, chemical engineering, etc. Filling with a volume of 10-100 ml/cycle is measured by the volumetric pump capacity method, for adjustment filling containers of various volumes is applied manually filling containers. Smooth adjustment of the number of cycles and the amount of filling without limitation. Meets health standards. Mixing device according to customer order. User manual and technical data sheet in English. Completeness and operability are guaranteed. We maintain a stock of parts and consumables in stock. The price is based on delivery to the buyer’s city.

Mechanical tablet press JT-6

9459

7705449

• 
• 
• 

The mechanical tablet press is a small tablet press, which is one of the most important devices for pressing granular raw materials into tablets or medicines in the pharmaceutical, chemical, food, electronic industries. The model of this tablet press can be used for pressing medicinal tablets, sweets, coffee tablets, electronics components, powder metallurgical components, various tablets of pesticides, fertilizers, etc. The mechanical tablet press is perfect for small-scale production, in a laboratory or hospital. Tablet press, can press tablets of different shapes, as well as press on both sides to release tablets with trademarks, letters and logos. User manual and technical data sheet in English. Before sending the tablet press to the customer, it is checked and tested in production. Completeness and operability are guaranteed. We…

Laboratory strength tester for tablets and granules TT-03

2365

7634502

• 
• 
• 
• 
• 
• 
• 
• 
• 

Professional laboratory measuring device for determining the hardness of tablets and granules. It is made of stainless steel and covered with chrome. High-precision indicator with recording of readings. There are three additional stands for tablets and pellets. Weight 2 kg. The portable and easy-to-operate device is used in the medical, food and chemical industries. We provide a full range of services: installation, training, start-up, repair. Simple mechanical design. User manual and technical data sheet in English. Complies with GMP standard. We provide detailed instructions for setting up this model of tablet and pellet tester. Before shipping, the devices are checked and tested in production. Completeness and operability are guaranteed. We maintain a stock of parts and consumables in stock. The price includes delivery to the buyer’s city.

Plastic ampoule filling and sealing equipment LTM-28

9220

7703051

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The equipment for filling and sealing plastic ampoules LTM-28 is controlled by PLC stepless frequency conversion and variable speed. The large color man-machine interface is simple and convenient to work with. The main components of the machine are imported. The filling head does not leak, fills correctly and without overflow. The material is made of high-quality stainless steel, in accordance with GMP standard. All 22 processes from roller rolling, AMP bottle forming, filling, final sealing, serial number printing, final trimming, cutting into pieces, etc. controlled by the program. User manual and technical data sheet in English. Completeness and operability are guaranteed. We maintain a stock of parts and consumables in stock. The price is based on delivery to the buyer’s city.

Filling and sealing equipment for oral liquids JFU-15

9220

7703054

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Equipment for filling and sealing oral liquids is a new generation product developed using the most advanced technologies, including the latest mechanics and electronics. The structure of the machine is simple, reasonably positioned, smooth, easy to operate and convenient to maintain and clean. SS 316L piston pump fills with high precision, suitable for filling oral liquids and liquids with light viscosity. This is a compact model, with optimal bottle transportation, stable in operation. Automatically stops the liquid supply in the absence of a container. The frequency converter automatically adjusts the speed. Automatic status display and counting. The rotating sealing device has one flexible knife with 12 rotating heads. The machine combines functions such as automatic bottle acceptance, filling, adding lids and smooth sealing. The whole…

Oral liquid filling and capping equipment JFG-12

9220

7703055

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The equipment for filling and capping oral liquids is designed for metered filling of small volume liquids in the food, chemical and pharmaceutical industries and automatically performs a full cycle of the following actions: delivery of containers, their metered filling, feeding, installation and tightening of lids, then the output of finished products. The platform for moving the bottles is connected by an input device, the bottles are transported smoothly after processing. Filling is carried out precisely and without foam formation. The equipment automatically stops filling in the absence of containers or capping in the absence of lids. The multi-head knife seals and seals tightly. The pressure heads move synchronously with the container holder without sliding on the rotating bottles. Touch screen control panel, stepless speed…

8-stream filling and capping equipment ZXP-05

9220

7703056

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The equipment for filling and capping in 8 streams is designed for filling water, syrups, oral and other liquids into plastic or glass bottles. The equipment is configured and controlled using an interactive system and a modern programmable controller, providing convenient configuration and accurate fill level. Equipped with a ceramic piston pump for filling, uses electromagnetic vibrations to deliver lids, can twist lids (plastic). Automatic invoice. This machine is stable in operation, convenient in maintenance and repair. It can be used independently or included in the production line. The production speed can be adjusted arbitrarily using a frequency converter. The multifunctional fault recognition system has the function of automatically stopping the equipment in the absence of filler, containers or lids. User manual and technical data sheet…

Tablet sorting and quality control equipment TST-25

9220

7703057

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Equipment for sorting and quality control of tablets (plain or wrapped) on both sides. A sorting machine with a tablet flip system will allow your operator to reliably check up to 50 kg of tablets per hour on both sides. The basic TST-25 machine can be equipped with a number of accessories to meet your individual needs, i.e. calibrated luminaires above the inspection area. Tablets with defects can be removed by the operator using a flexible manual device with a vacuum nozzle. The flow of tablets from the hopper enters a vibrating perforated trough, where coarse dust and chips are sifted, which is then collected in the container. The products arrive at the inspection platform in one layer. The tablets are placed on a conveyor belt…

Machine for sticking self-adhesive labels on cardboard boxes MT-05

2358

7634435

• 
• 
• 
• 
• 
• 
• 

Desktop automatic labeling machine for self-adhesive labels on cardboard boxes. It is used for pharmaceutical, cosmetic and medical products packed in cardboard packaging. The sticker is vertical. Productivity of 1200-2400 labels per hour. Weight 25 kg. We provide a full range of services: installation, training, start-up, repair. Simple mechanical design. Complies with GMP standard. We provide detailed instructions for setting up this model of labeling machine. User manual and technical data sheet in English. Before shipping, the labeling machines are checked and tested in production. Completeness and operability are guaranteed. We maintain a stock of parts and consumables in stock. The price includes delivery to the buyer’s city.

Laboratory high-speed knife mill PRO-01

2362

7634478

• 
• 
• 
• 
• 

Automatic laboratory mill of knife type with loading of raw materials. The design does not allow controlling the fraction of the resulting material at the outlet. Loading up to 250 grams. Weight 4 kg. The rotation speed of the hammers is 2500 revolutions per minute. Portable, economical and easy to operate, the machine is used in the medical and food industries to produce powder, in the chemical industry and other industries. We provide a full range of services: installation, training, start-up, repair. Simple mechanical design. Complies with GMP standard. We provide detailed instructions for setting up this model of shredders. User manual and technical data sheet in English. Before shipping, the machines for grinding raw materials are checked and tested in production. Completeness and operability are…