Automatic machine for filling and sealing plastic tubes “HX-9”
Capacity: 20-30 tubes per minute
Number of cells in the carousel: 10 pieces
Tube diameters: from 5 to 50 mm
Tube type: plastic
Dispensing types: A(3-30 ml), B(6-60 ml), C(10-120 ml), D(25-250 ml), E(50-500 ml)
Maximum tube height: 200 mm
Ultrasonic frequency: 20 kHz
Motor power: 2.0 kW, 220V, 50 Hz
Overall dimensions: height 1700 mm, width 1370 mm, length 1650 mm
Weight: 480 kg
Weight with packing: 560 kg

Automatic machine for filling plastic tubes and ultrasonic edge sealing of creams and ointments. Complemented with the function of tube position orientation according to the mark printed on the tube. The system of embossing expiration date and batch number is applied. There is also a mechanism for trimming the edge of the tube. It is used in the production of cosmetics, medicines, food products. The customer must provide the dimensions of the tubes. The manufacturer makes plastic molds to fit the size of the customer’s tubes. The design is a rotating table with 10 holes, in each hole is installed a plastic cup under the diameter of the tube. Feeding and filling of the tube, orientation on the photo mark, sealing the edge and ejection of the finished tube is done automatically. Dosage setting is simple and easy to understand. If necessary, it is possible to order sets of molds for all sizes of tubes of interest. Clamping of the tube edge is pneumatically driven. The height of the clamping jaws can be adjusted to the height of the tube.