Customer's Question: In continuation of the conversation with you on the granulator, I inform you. The required granulate capacity is 45 kg, the required product capacity is 1500 cans of 60 capsules, which corresponds to 90,000 pieces of 0.45 g (rounded to 100,000).
It is possible to produce granulate in several batches, say 10-15 kg each and combine.
There are 2 options for executing the process.
1) Make the granulate in a granulator mixer, then dry the granulate on a shelf dryer, then grind and level the dried granules to a homogeneous fraction on a calibrator.
2) Grind the raw material and mix it (you can use a granulator mixer without adding a binder solution), then dry it in a fluidized bed dryer.
Then, in both cases, pack in a capsule filling machine of 0.45 g and polish.
Response from MINIPRESS:
We read your message and remembered our conversation with you on the phone.
You insist on granulation, and we want to offer you another simpler method consisting of several stages:
1. Grinding your raw materials in the mill to a homogeneous fraction (available).
2. Mixing in dry form to a uniform mass (no problem to pick up).
3. Encapsulation in gelatin capsules with a vertical scr...
We were approached by a leading technologist of one of the largest confectionery enterprises in Russia.
Client's question: I want to purchase for a new production a press for pressing various shaped candy tablets with low productivity and equipment for packing them into blisters.
Response from MINIPRESS: Dear customer, we have received your request in which you are looking for a candy press and a blister machine. Our company has been supplying presses and blister packaging machines for many years.
Client's question: We want to buy a tank for 150 liters with electric heating and everything necessary for the preparation of a mixture of gelatin and water. The mixture will later be used for the manufacture of gelatin capsules. Tell us the delivery time, cost and payment terms.
Response from MINIPRESS:
Thank you for contacting us!
We have taken up your question about gelatin preparation equipment.
Unfortunately, you have provided little information to help you with your choice.
We ask you to answer the questions.
Customer's Question: We want to produce pills or pills of unusual shape.
Our production capacity is up to 10 kg of pills per day.
We will need the entire line of equipment for the production of dragees: a
shredder, a powder mixer, a draining coating machine, etc.
We want to produce pellets with a diameter of 5-8 mm from algae biomass, coated. We can produce according to your recommendations.
In your opinion, is it financially more profitable to produce pills or pills?
How long do you think the process takes from making the dough to completely drying the balls?
The equipment needs to be delivered to Lithuania. We are waiting for a commercial offer.
Customer's Question: In continuation of our telephone conversation, I am writing to you. We need equipment for the production of pressed sugar. An example of the products can be viewed on the website, the link I sent you. What can you offer?
Response from MINIPRESS:
We have carefully looked at the products on the website you indicated. Our professional experience allows us to state with 90% confidence that these "sugar tablets" were not pressed dry.
Customer's question: Our organization has plans to supply a line for the production of sterile ampoules with a batch size of no more than 10,000 pcs. on shift.
Response from MINIPRESS:
We have extensive experience in this area. In order to make it easier for you to understand the upcoming project, we recommend that you:
Customer's Question: Our company has already purchased semi-automatic capsulators from you. We would like to purchase another one. The size of the capsules is "0". In addition to the car, we want to buy two sets of boot disks. Important information about the diameter of the pushers on the yershe. The required size is 5 mm.
Will you be able to send the CP to the capsule polisher or is it already included with the capsulator?
We also need spare parts for existing equipment. Can I order from you?
Response from MINIPRESS:
Thank you for choosing our company again.
Let's clarify the information on your order.
Customer's Question: We want to purchase equipment, and in particular: a desktop encapsulator semi-automatic ITA - 12, freeze dryers (LZY-0.5 freeze drying), SJP-15D blister packing machine plate type aluminum/PVC aluminum/aluminum and laboratory powder mixer.
If you have the necessary information, we hope for your answer.
Response from MINIPRESS:
We always try to take a very responsible approach to the process of selecting equipment for customers. Unfortunately, we see now that due attention is not paid to the details, namely, the quality of the equipment and the solution of your tasks depend on them.
Consider the items from your list.
Customer's question: Make a commercial offer for a shredder of green grass and root crops, with a capacity of 5 tons /hour, a grinding fraction from 5 mm to 10 mm.
Response from MINIPRESS:
We are glad that you turned to us. We will try to offer you the optimal solution, after clarifying some information.
Customer's question: Good afternoon! I ask you to consider the possibility of manufacturing /supplying
a line for sealing, filling with powder and final sealing of the tube (drawing in
the attachment).
You need to seal one edge, as we understood, so that the powder does not spill out, and also the powder needs to be sealed inside the tube. Right?
We offer the following option for organizing this work.
Let's use a tablet press to press your powder into tablets with a diameter of 5 mm and some thickness. Having tablets from this powder, it will be convenient to put them inside the tube. Powder tableting makes it possible to choose the strength of the finished tablet, to get the exact weight of each tablet. Tablets can be made of any height, for example, from 3 to 15 mm. If you need to put more powder in the tube, then you can pack several tablets there one by one. You can adjust the diameter of the finished tablet very precisely.
We solve several of your problems at once, namely: we adjust the weight of the powder in each tube, facilitate the dosing process in tablets into the tube. There is no need to seal the powder inside the tube, as well as the need to pre-seal the tube befor...
Deutsch
Français
Italiano
Polski
Español
Русский
Português
9269
8485926
