Tablet and capsule dissolution analyzer “RC-03”
Speed range: (20-200) revolutions per minute
Rotation speed error: ±2 revolutions per minute
Liquid temperature control temperature: approximately +45℃
Temperature stability: ±0.3℃
Timer setting time: (5-900) minutes
Time error: ±0.5 min
Paddle stop time: ±0.5 min
Tank stop time: ±1.0 min
Power: 220V/50Hz/600W or 110V/60Hz/600W
Dimensions: 510×300×480 mm
Size with packing: 800x470x680 mm
Weight: 35 kg
Weight with packing: 43 kg

The dissolution analyzer is used to measure the rate and degree of dissolution of tablets, capsules, etc. in laboratory conditions. It has three reservoirs and three blades arranged in one row. The main parts of this equipment rotate smoothly and flexibly. All tanks and blades are made of stainless steel (SUS316L). The water flow is circulated by magnetic pump, evenly distributed throughout the system, and the “water bath” maintains the same temperature. This tablet dissolving device is equipped with automatic control of temperature, speed change and time. These parameters are set by a timer. They can be controlled using the push buttons. The results are displayed on the panel. The set values on the timer and the values during operation can be displayed alternately. Automation: auto-test, auto-diagnosis, auto-alarm. The equipment can test itself and signal automatically. Dissolution parameters of substances are stored in the equipment memory and can be displayed at any time. The time can be set on the timer for many positions. The signaling device signals automatically for any timer position and then the tester automatically moves to the next position.