Tablet coating machine with shell substance atomization system “DK-30”
Diameter coater: 300 mm
Capacity: 2-3 kg/load
Coating machine heating temperature regulation
Working temperature: +80 degrees
Coating machine rotation speed: 0-46 rpm
Motor power: 0.37 kW
Hair dryer power: 40 W
Total machine power: 1.5 kW
Air flow rate: 0.5 m3 per minute
Overall dimensions: 485mm x 585mm x 765mm
Weight: 65 kg
Weight with packaging: 75 kg

Casing – fully enclosed with stainless steel sheets. The rotor and electric motor are accessible through the removable rear cover. From the motor pulley, the force is transmitted to the gearbox via a belt drive. A stainless steel coating machine is connected to the gearbox shaft. The coating machine is heated from below by a heating element. A hot air pipe is fed into the coating machine. The heated surface of the coating machine allows to maintain the temperature of the sugar syrup and evenly distribute the shell over the entire surface of the tablets. Introduction of the substance forming the shell into the tablets is carried out through a built in atomization system. On the body of the coating machine is fixed control unit with buttons “Start” and “Stop”. The undoubted advantage of the dragee coating machine is the small size of the desktop device. The use of stainless steel coating machine will allow you not to worry about oxidation of the working surface. The construction of the coating machine is made of stainless steel, which allows the use of detergents in the daily operation of the equipment. The construction is very stable.