Desktop Semi-automatic Capsule Filling Machine “ITA-015”
Materials: Stainless steel AISI 304 and plastic
Capacity: minimum 60 pieces at a time
Capacity: maximum 220 pieces at a time
Average operator speed: 2800 capsules per hour
Usage voltage: 220V, 50-60 Hz
Power consumption: 80 W
Suitable for hard gelatin capsules size: 000,00,0,1,2,3,4,5
Overall dimensions: 310mm x 380mm x 500mm
Weight: 25 kg
Weight with packaging: 30 kg

Semi-automatic machine for filling hard gelatin capsules with powder, model ITA-015, of high quality made in Italy. It is designed to work with capsules in assembled form. The working process is divided into several operations. Capsule orientation – using a special device, the operator fills the capsules with plates with holes. In this case, the capsules are placed in the plates with the lids upwards. Separation of capsules – using special clamps half of the capsules are fixed in the plates. Then the operator manually separates the capsules in a group. Capsule filling – the plate with the long half capsules is placed under the limiting plate, which is used to control the amount of powder during filling. Powder is poured onto the plate in advance calculating the dose for all 200 capsules. The powder is spread over the capsules using a plastic scraper. If it is necessary to add dose weight to each capsule, a pressing device is used. An additional dose of powder is then delivered to the vacated space in the capsule. Capsule joining – the operator joins the two plates to the capsule halves, followed by the process of snapping the capsule lock. Capsule extraction – after filling the capsules with powder, the operator squeezes the plate with ready capsules with his hands and the capsules are pushed out of the plate holes. Then all operations are repeated with new empty capsules.
The equipment comes with a detailed instruction manual in Italian and English with illustrations of the working process.