Rotary tablet press model “ZL-15”
Number of press tools: 15 pairs
Basic pressing: 120KN (12000 kg/cm2)
Maximum diameter of tablets: 50mm
Powder filling depth in the die: 50 mm
Maximum height of tablets: 25 mm
Press tool type: by special order
Adjustable rotor speed: 9-20 rpm
Capacity: 9000-18000 tablets per hour
Electric motor: 7?5 kW, 1440 rpm, 380V
Overall dimensions: 1300x1500x1850 mm
Weight: 1950 kg (with packing 2250 kg)

The automatic can be used for the production of large diameter series of tablets up to 50mm and also with inner hole, as a production tool in powder tabletting. The rotary tablet press is of the simplest design and construction, easy to operate. Model ZL-15 is an automatic carousel type rotary tablet press. The scheme of operation of the press consists in transferring, by means of a gearbox, the rotation from the electric motor to the pulley, on the axis of which the rotor is located. The rotary tablet press is designed for pressing tablets from the prepared tablet mass. The capacity is adjustable, with a maximum of 18000 tablets per one hour of operation. The speed of pressing is adjustable. We complete this press with molds: dies of different diameters (from 15 to 50 mm) and punches. Punches with a long body are upper and installed in the upper part of the press. Punches with short body and long working part are lower and their task is to push the tablet out of the die. They are installed in the lower part of the press. The press operates in automatic mode. Before plugging the press into the network and starting work, it is necessary to carefully study the video instruction and familiarize yourself with the principles of its operation. After that, its operation will become clear and simple for you. The press has an electric motor, as well as a debugging wheel with a handle. All adjustments and settings are made manually by turning the wheel. Be careful when connecting the electric motor, the direction must correspond to the arrow. The powder is loaded into the press through a funnel-shaped hopper. It can be easily removed, rinsed and reinstalled. The powder is fed from the hopper via a feeder. An active feeder with forced powder feeding into the die is also available. When the rotor of the press rotates, the powder is fed into the die, where it is pressed and then the finished tablet is pushed to the surface. On the body of the press there is a control unit. We can produce any sets of press tools (punches and dies for rotary tablet presses).