Spraying tablet coating machine DK-43
Diameter of the coater: 400 mm
Capacity: 5-6 kg/load
Coating machine heating temperature regulation
Working temperature: +80 degrees
Coating rotation speed: 0-46 rpm
Motor power: 0.55 kW
Hair dryer power: 40 W
Total machine power: 1.5 kW
Air flow rate: 0.5 m3 per minute
Overall dimensions: 865mm x 585mm x 710mm
Weight: 65 kg
Weight with packaging: 75 kg

Mobile automatic atomization system for shell forming substance.
Weight: 45 kg
Total weight: 120 kg

The model has a movable automatic system of shell atomization through nozzle nozzle inside the coating machine. The nozzle is placed on a bracket, which is fixed to the coating machine body. The casing is completely enclosed by stainless steel sheets. Access to the rotor and electric motor is through a removable rear cover. From the motor pulley, through a belt drive, the force is transmitted to the gearbox. A stainless steel coating machine is connected to the gearbox shaft. The coating machine is heated from below by a heating element. A hot air pipe is fed into the coating machine. The heated surface of the coating machine allows to maintain the temperature of the sugar syrup and evenly distribute the shell over the entire surface of the tablets. Introduction of the substance forming the shell into the tablets is carried out through a built in atomization system. On the body of the coating machine is fixed control unit with buttons “Start” and “Stop”. The undoubted advantage of the dragee coating machine is the small size of the desktop device. The use of stainless steel coating machine will allow you not to worry about oxidation of the working surface. The construction of the coating machine is made of stainless steel, which allows the use of detergents in the daily operation of the equipment. The construction is very stable.v