Tablet press model «UNIC 600A»
version with the possibility of using 1,2,3 punches
Maximum compression force: 50 KN (5000 kg/cm3)
Maximum diameter of tablets:
1 piece diameter up to 25 mm
2 pieces up to 10 mm diameter
3 pieces up to 7 mm diameter
Minimum diameter of tablets: 5 mm
Height of finished tablets: up to 8 mm
Maximum filling depth of the matrix: 20 mm
Tablet press capacity:
3600 tablets per hour with 1 punch
7200 tablets per hour with 2 punches
10800 tablets per hour with 3 punches
Electric motor: 1,5 kW, 1400 rpm, 220 V.
Overall dimensions: 580mm x 500mm x 830mm
Weight of tablet press: 190 kg
Weight with packaging: 240 kg

This model is suitable for small companies, start-up manufacturers, scientific, educational institutions that use the press for pressing small batches of tablets, as well as a means of debugging technologies in the production process, selecting the necessary components for pressing tablets. The press is compact and easy to set up. Tablet press UNIC 600A is a single punch press of eccentric type. The operating scheme of the press consists in transferring, by means of a gearbox, the rotation from the electric motor to the pulley, on the axis of which there is an eccentric. The press is designed for pressing tablets of 1, 2 and 3 pieces. Capacity 3600 tablets per hour with 1 punch, 7200 tablets per hour with 2 punches, 10800 tablets per hour with 3 punches. Tablet press UNIC 600A is supplied with a set of molds: dies of different diameters (from 6 to 25 mm) and punches. Some of the punches have a long body and a short shank, while the other has a short body and a long shank. The punch with a long body is the upper one and is installed in the upper part of the press. The punch with a short body and a long working part is the lower one and its task is to push the tablet out of the die. It is installed in the lower part of the press. The press works only in automatic operation. Before plugging the press into the network and starting work, it is necessary to carefully study the video instruction and familiarize yourself with the principles of its operation. After that, its operation will become clear and simple for you. The press has an electric motor, as well as a debugging wheel with a handle. All adjustments and settings are made manually by turning the wheel. Be careful when connecting the electric motor, the direction must correspond to the arrow. The powder is loaded into the press through a removable funnel-shaped hopper. It can be easily removed, rinsed and reinstalled. The powder is fed from the hopper via a movable foot. As the press rotates, the foot moves and feeds the powder into the die, where it is pressed and then the finished tablet is pushed to the surface. There is a control unit (ON and OFF buttons) on the press body.