Rotary press model "RZ-9"
Number of punches: 9 pairs
Maximum compression force: 40 KN (4000 kg / cm3)
The maximum diameter of the tablets: 13 mm
Minimum diameter of tablets: 5 mm
Height of finished tablets: up to 6 mm
Maximum matrix depth: 15 mm
Tablet press capacity: 17,200 tablets per hour
Electric motor: 1.1 kW, 1400 rpm, 220 V.
Overall dimensions: 1550mm x 480mm x 650mm
Tablet press weight: 260 kg
Shipping Weight: 340 kg

This model is suitable for small companies, beginning manufacturers, scientific, educational institutions that use a rotary press for pressing small-scale or experimental batches of tablets, as well as a means of debugging technologies in the production process, and selecting the necessary components for pressing tablets. The rotary press is compact and easy to set up. Model RZ-9 is a rotary floor press of a carousel type. The scheme of the press is to transmit, by means of a gearbox, rotation from an electric motor to a pulley, on the axis of which there is a rotor. The press is designed for direct compression of tablets. Productivity 17,200 tablets per hour. This model comes with a set of molds: dies of various diameters (from 6 to 13 mm) and punches. The punches with a long body are upper and are installed in the upper part of the press. A punch with a short body and a long working part is the bottom and its task is to push the tablet out of the matrix. They are installed at the bottom of the press. The press only works in automatic mode. Before connecting the press to the network and starting work, you must carefully study the video instruction and familiarize yourself with the principles of its operation. After that, its operation will become understandable and simple for you. The press has an electric motor, as well as a debug wheel with a handle. All adjustment work and settings are made in manual mode by rotating the wheel. Be careful when connecting the electric motor, the direction should correspond to the arrow. The powder is loaded into the press through a removable funnel-shaped hopper. It can be easily removed, washed and installed back. Powder is fed from the hopper through the feeder. When the rotor of the press rotates, the powder is fed into the matrix, where it is pressed and, then, the finished tablet is pushed to the surface. There is a control unit on the press body.

It perfectly presses if you pre-prepare the tablet mass. But if you fall asleep with air powder, then volumetric dosing does not work well. Necessarily requires wet granulation of any hard-flowing powders.

Moroz Victor Ivanovich,  Moscow

We purchased a rotary press model at the company, and at first we could not understand the production technology, after which we turned to the company for consultation. Consultant Roman Tsibulsky, clearly explained the entire production technology on this equipment. We are very glad that you turned to this company.

Kulikova Regina, Firn X CJSC, Nizhny Novgorod

There are no complaints about the rotary press, the equipment works without problems, efficiently and quickly. But the delivery system could be improved, since the delivery was late for several days.

Bykov M.V., Oryol

Very satisfied with the service. Bought "RZ-9", recently several parts failed. We turned to the company for help, after which we quickly delivered spare parts.

Mosquitoes Maksim, Tambov region

An individual order was made for the production of vitamin. For this it was necessary to purchase a rotary tablet press with the production of tablets over 16,000 per hour. The manager advised this press. Satisfied with the purchase. Thanks for the help in choosing.

Vladislav Ratomsky, Voronezh

Urgently needed equipment for the manufacture of tablets with a diameter of 13 mm in the amount of 17,000 per hour. A suitable option was a rotary tablet press. The operational work of Roman helped our company.

Alexey Bogdanov, LLC "SIN", city ​​of Vanev