Rotary tablet press "RZJ-35"
Number of pairs of press tool: 35
Maximum pressing force: 80 KN (8000 kg / cm2)
Pre-pressing: 20 KN (2000 kg / cm2)
The maximum diameter of the tablets: 13 mm
Maximum tablet thickness: 9 mm
Maximum depth of backfill into the matrix: 18 mm
Maximum productivity: 159,000 tablets per hour
Rotor Speed: 38 rpm
Outer Diameter of the Matrix: 26 mm
Matrix Height: 22 mm
Outer diameter of punches: 22 mm
Punches Length: 115mm
Main engine power: 5.5 kW
Overall size: 1200mm x 900mm x 1650mm
Shipping Weight: 2200 kg

High-speed rotary tablet press for the production of a series of tablets of large diameters, as a means of production in tabletting powders. The rotary tablet press is of simple design and construction, easy to operate. Model RZJ-35 is an automatic rotary press of a carousel type. The scheme of the press is to transmit, by means of a gearbox, rotation from an electric motor to a pulley on the axis of which a rotor is located. The rotary tablet press is intended for pressing tablets from granular powder mass. Performance is adjustable, with a maximum of 159,000 tablets in 1 hour. The rotor speed is adjustable. We complete this press with molds: dies of various diameters (from 6 to 13 mm) and punches. The punches with a long body are upper and are installed in the upper part of the press. Punches with a short body and a long working part are the bottom and their task is to push the tablet out of the matrix. They are installed at the bottom of the press. The press works automatically. Before connecting the press to the network and starting work, you must carefully study the video instruction and familiarize yourself with the principles of its operation. After that, its operation will become understandable and simple for you. The press has an electric motor, as well as a debug wheel with a handle. All adjustment work and settings are made in manual mode by rotating the wheel. Be careful when connecting the electric motor, the direction should correspond to the arrow. The powder is loaded into the press through a funnel-shaped hopper. It can be easily removed, washed and installed back. Powder is fed from the hopper through the feeder. It is possible to supply an active feeder with forced feeding of powder into the matrix. When the rotor of the press rotates, the powder is fed into the matrix, where the pressing occurs and, then, the finished tablet is pushed to the surface. There is a control unit on the press body. We will make any sets of press tools on order (punches and dies for rotary tablet presses).

We bought two such machines in their pharmaceutical workshop. Pressed dietary supplements for many years. Molds, punches and dies quickly die.

Gennady Mikhailovich , Krasnoyarsk

At such a cost, such a high compression rate of tablets. Actually dispersed on a tablet of 8 mm to 150,000 per hour.

Shapovalov Igor, Tyumen

I want to share my impressions of the new rotary tablet press, which was selected according to the specifics of my production. MiniPress completed the order on time. Inexpensive. With the expansion of production, I will definitely purchase one more.

Ivanov I.T., Kaluga

Operational work, quality advice. I have been using MiniPress for the fourth time, and the service is only improving. This time I bought a high-speed rotary tablet press, for the enterprise, I am happy with everything.

Rams Evsey Gennadievich, CJSC "G-Synthesis", Tyumen region

We expanded the workshop. As a result, it was decided to purchase a new, more productive rotary tablet press. A minimum of 100,000 tablets per hour was required. But they found even more productive and at a nice price. After the acquisition, there were small problems, but quickly resolved. Now our production works like a clock!

Koronenko Lidia Arkadevna, Tomsk

The rotary tablet press was purchased about six months ago. During this time, it has established itself in production. He also increased productivity by 2 times.

Boris Arkadiev, LLC "Farming", Natalievsk