Video review of the model
More videos of this model:
Our service and customer service
Tabletpress model “POWER SUPER PRESS”
Maximum compression force: 40 KN (4000 kg / cm3)
Maximum diameter of tablets: 50 mm
Minimum diameter of tablets: 5 mm
Height of finished tablets: up to 25 mm
Maximum filling depth of the die: 40 mm
Productivity of the tablet press:
3600 tablets per hour, with a diameter of 5 to 20 mm
2000 tablets per hour, with a diameter of 20 to 50 mm
Electric motor: 1.5 kW, 1400 rpm, 220V or 380V
Overall dimensions: 800mm x 950mm x 700mm
Weight of tablet press: 120 kg
Shipping Weight: 160 kg
This model of tablet press is developed and for a long time produced by MINIPRESS in Russia. After a lot of refinement is one of the most popular, reliable and universal models that we recommend to our customers. To serve this press you will need a set of keys: hexagonal No. 10,8,6 and two car keys number 17 and 19. POWER SUPER PRESS – single-punch, crank eccentric press. The principle of its operation is quite simple: a pulley is put on the electric motor shaft. Through the belt transmission, the rotation is transferred to a large flywheel, on the shaft of which is a small bronze gear. From the bronze gear, the rotation is transferred to a large pinion, on the shaft of which the eccentric itself is clothed. It sets in motion the upper punch and creates the necessary pressing force. The frame of the tablet press has a stand for the electric motor fixed with two screws. Belts can be pulled by pushing out the bolts securing the motor, thanks to the slots available in the stand. Tablet press and stand have height-adjustable feet, with which the press is given a stable position. It is not recommended to tighten the belts too much, their function is to untwist a large flywheel, and not direct pressure. The flywheel, spinning like an eccentric, with centrifugal force transmits the rotation to the axis and, further, to the gears. The flywheel is equipped with a removable handle, installed in a special hole, for debugging work. After adjusting the pressure in manual mode, this handle must be removed in order to avoid injury after turning on the motor. Powder feeding system in the pressing zone: a large hopper is immovably fixed to the press frame, from which a flexible corrugated hose comes directly to the foot which feeds the powder to the pressing zone.
OUR SERVICES FOR CLIENTS:
1) TRAINING OF PRESSING TECHNOLOGY.
To all our customers who purchased equipment, we provide literature on the basics of tablet pressing. We carry out consultations by phone and by correspondence, we help to solve arising difficulties at manufacture on our equipment. We supply spare parts and consumables. We render services in the help on realization of the tablet equipment of the used.
2)WE COMPLETE MANUFACTURE OF TABLETS.
We have a large assortment of additional equipment for tablet production. At the request of the client, we will select a model for the desulphurizer of tablets, a vacuum powder feeding system for press silos, granulators, powder mixers, equipment for coating tablets, printers for printing logos on tablets, packing and packing equipment for tablets.
3) MANUFACTURE OF PUNCHES AND MATRIX.
On a permanent basis, we produce press tools for rotary tablet presses in our own production, we place orders for similar plants in India, China, and the USA.
4) SPARE PARTS SUPPLY
We cooperate with manufacturers of tablet presses and we are engaged in deliveries of spare parts for any model of rotary tablet presses purchased in our company.