Video review of the model
Our service and customer service
Hydraulic tabletop press model “R-40”
Maximum compression force: 400 KN (40000 kg / cm3)
Maximum diameter of tablets: 100 mm
Minimum diameter of tablets: 10 mm
Height of finished tablets: up to 70 mm
Maximum filling depth of the matrix: 150 mm
Productivity of the tablet press: 300 tablets / hour
Stroke piston stroke: 155 mm
Length of the lever: 490 mm
Overall dimensions: 380mm x 265mm x 390mm
Weight of tablet press: 45 kg
Weight with packing: 55 kg
The desktop hydraulic press is applicable as a laboratory press in the chemical, metallurgical industry. The kit includes spare stuffing boxes and consumables. We produce any molds and molds. The main part of the press is the base plate, the main plate combines the bearing racks and the upper base plate. On the main plate is mounted a hydraulic cylinder, a dynamometer and a system of levers. A press tool and a die are installed on the working surface of the hydraulic cylinder. Control of the stroke of the press cylinder is carried out by a screw stopper. Three actions are performed in turn to comply with the parameters of the obtained tablets. Laboratory desktop hydraulic press is a compact, desktop device. After you install the press on the table, you can use it. It is convenient to assemble or dismantle the structure. Indications 1 MPa = 6.5 KN 1 KN = 0.154 MPa. Installation: collect the press, place the matrix on the surface of the hydraulic cylinder table, manually fill the matrix with powder, having measured the required weight with a measuring glass. Install the punch in the die, from the top with the screw stop press the punch. Set the lever and begin to generate pressure in the hydraulic cylinder by swinging movements. On the dynamometer you will see the testimony of the press you create. Then bleed the fluid from the hydraulic cylinder, lift the stop screw slightly upwards. Under the matrix, install the supports, then again force the lever to extrude the finished tablet from the matrix.
OUR SERVICES FOR CLIENTS:
1) TRAINING PRESSING TECHNOLOGY.
To all our customers who bought equipment, we provide literature on the basics of tablet pressing. We carry out consultations by phone and by correspondence. We supply spare parts and consumables. We render services in the help on the realization of the hydraulic presses, second-hand.
2) WE COMPLETE MANUFACTURE OF TABLETS.
We have a large assortment of additional equipment for tablet production. At the request of the client, we will select a model for the desulphurizer of tablets, a vacuum powder feeding system for press silos, granulators, powder mixers, equipment for coating tablets, printers for printing logos on tablets, packing and packing equipment for tablets .
3) MANUFACTURING PUNCHES AND MATRIXES.
On a permanent basis, we produce press tools for hydraulic presses in our own production, we place orders for similar plants in India, China, and the USA.
4) SPARE PARTS SUPPLY
We cooperate with manufacturers of tablet presses and we are engaged in deliveries of spare parts for any model of hydraulic presses purchased in our company.