Video review of the model
Our service and customer service
Semiautomatic machine for packing cream and glue in aluminum tubes “WJ-12”
Number of stations for tubes: 16
Filling capacity: 2-30 grams, 50-75 grams, 30-150 grams
Dosing accuracy: ≤ ± 2%
Capacity: 30 tubes per minute
Air: pressure 0,6-0,7 MPa, volume more than 0,2 m3 / min
Pipe diameter: 16-35 mm
Power: 1.1 kW
Overall dimensions: 1130mm x 750mm x 1680mm
Weight: 220 kg
Weight with packing: 300 kg
Semi-automatic machine for filling with glue or cream of aluminum tubes. The automatic position of the tube can be automatically adjusted according to the label printed on the tube. The system of applying the expiration date and batch number is applied. There is also a mechanism for double clamping the edge of the tube. Used in the manufacture of cosmetics, medicines, food. The customer must provide dimensions and samples of tubes. The manufacturer makes plastic molds to fit the customer’s aluminum tubes. The design is a rotating table with 16 holes, in each hole is installed a plastic cup for the diameter of the tube. The operator performs only one function – sets empty tubes in the glasses. Filling the tube, orienting the photo mark, clamping the edge and pushing out the finished tube automatically. Simple and clear dosage adjustment. If necessary, you can order sets of forms for all the tube sizes of interest. Clamp the edge of the tube is produced by pneumatic drive. The height of the pressure lips is adjusted to the height of the tube.
OUR SERVICES FOR CLIENTS:
1) TRAINING TECHNOLOGIES FOR FILLING ADHESIVES OF ALUMINUM TUBS.
We can train you on our equipment before buying. Testing of materials. We provide consultations on the organization of production of aluminum tubes, with a full range of additional equipment and consumables.
2) WE COMPLETE LABORATORIES FOR PHARMACEUTICAL PRODUCTION.
We have mechanical machines for packing glue into aluminum tubes for the production of pilot batches of glue in Russia, which we provide to our customers. You can always contact us with your ideas and requests. Currently, the manufacturer of machines for aluminum tubes can offer equipment for automatic and semi-automatic use.
3) DELIVERY OF EQUIPMENT FOR PROCESSING ALUMINUM TUBES.
The products fully comply with the new GMP requirements. The production of machines for filling tubes is accompanied by strict quality control, verification of all documentation, well-organized after-sales service of equipment.
4) SPARE PARTS SUPPLY
The manufacturer can also offer a model of the machine for aluminum tubes, based on the goals and objectives of the customer. We will assist in the maintenance and repair of any equipment for filling and sealing tubes. Service center in Russia for the CIS countries.