Video review of the model
Our service and customer service
Automatic filling and sealing machine for plastic tubes “HX-6”
Productivity: 20-30 tubes per minute
Number of cells in the carousel: 10 pieces
Tube diameters: 5 to 50 mm
Tube type: plastic
Dosage types: A (3-30 ml), B (6-60 ml), C (10-120 ml), D (25-250 ml), E (50-500 ml)
Maximum height of tubes: 250 mm
Ultrasound frequency: 20 kHz
Engine power: 2,0 kW, 220V, 50 Hz
Overall dimensions: 1700 mm x 1370 mm x 1650 mm
Weight: 380 kg
Shipping Weight: 460 kg
Semi-automatic machine for filling plastic tubes and ultrasonic sealing edges with creams and ointments. It is supplemented with the orientation function of the tube by the label printed on the tube. The system of applying the expiration date and batch number is applied. Also there is a mechanism for trimming the edge of the tube. Used in the manufacture of cosmetics, medicines, food. The customer must provide the dimensions of the tubes. The manufacturer makes plastic molds to fit the customer’s tubes. The design is a rotating table with 10 holes, in each hole is installed a plastic cup for the diameter of the tube. The operator performs only one function – sets empty tubes in the glasses. Filling the tube, orienting the photo mark, sealing the edge and pushing out the finished tube automatically. Simple and clear dosage adjustment. If necessary, you can order sets of forms for all the tube sizes of interest. Clamp the edge of the tube is produced by pneumatic drive. The height of the pressure lips is adjusted to the height of the tube.
OUR SERVICES FOR CLIENTS:
1) TRAINING TO THE TECHNOLOGIES OF TUBING.
We can train you on our equipment before buying. Testing of materials. We provide consultations on the organization of the production of plastic tubes, with a full range of additional equipment and consumables.
2) WE COMPLETE LABORATORIES FOR PHARMACEUTICAL PRODUCTION.
We have ultrasonic machines for sealing plastic tubes for the production of pilot batches in Russia, which we provide to our customers. You can always contact us with your ideas and requests. Currently, the manufacturer of machines for edge sealing tubes can offer equipment for automatic and semi-automatic use.
3) DELIVERY OF EQUIPMENT FOR WELDING PLASTIC TUBES.
The products fully comply with the new GMP requirements. The release of machines for sealing tubes is accompanied by strict quality control, verification of all documentation, well-organized after-sales service of equipment.
4) SPARE PARTS SUPPLY
The manufacturer can also offer a machine model for tube sealing, based on the customer’s goals and objectives. We will assist in the maintenance and repair of any equipment for filling and sealing tubes. Service center in Russia for the CIS countries.