Video review of the model
More videos of this model:
Our service and customer service
Tabletpress model “DP-30”
version with the possibility of using 1,2,3 punches
Maximum compression force: 30 KN (3000 kg / cm3)
Maximum diameter of tablets:
1 piece in diameter up to 20 mm
2 pieces up to 10 mm in diameter
3 pieces up to 7 mm in diameter
Minimum diameter of tablets: 6 mm
Height of finished tablets: up to 12 mm
Maximum filling depth of the die: 20 mm
Productivity of the tablet press:
3600 tablets per hour with 1 punch
7200 tablets per hour with 2 punches
10800 tablets per hour with 3 punches
Electric motor: 0.75 kW, 900 rpm, 220 V.
Overall dimensions: 710mm x 460mm x 740mm
Weight of tablet press: 90 kg
Shipping Weight: 160 kg
A tablet press that can be used in the pharmaceutical, chemical and food industries, in powder metallurgy for the production of tablets, briquettes and boluses from loose powder materials. From the hopper, the powder is metered into the matrix. Direct compression of powder and granular materials is used. The tablet is produced by two punches (upper and lower) in the matrix. Replacing the press tool allows you to produce tablets with a diameter of 6 to 20 mm. The maximum height of the finished tablets is 13 mm. The design of the press provides for the installation of one, two and three positional punches, with one tablet of compression can produce 3 tablets with a diameter of 7 mm, or 2 tablets with a diameter of 10 mm or 1 tablet with a diameter of 20 mm. The press operates in automatic mode. Before switching on the press and starting the work, it is necessary to carefully study the video instruction and familiarize yourself with the principles of its operation. After that, its operation will become clear and simple for you. The press has an electric motor, as well as a debug wheel with a handle. All adjusting works and adjustments are made in manual mode by rotating the wheel. Be careful when connecting the motor, the direction must match the arrow indicated. The powder is fed into the press through a funnel-shaped hopper. It can be easily removed, rinsed and installed back. The feed of the powder from the hopper is through the feeder. When the press rotates, the powder is fed into the matrix, where the pressing takes place and then, by pushing the finished tablet onto the surface. On the body of the press there is a control unit. We make to order any sets of press tools (punch and matrix for rotary tablet presses).
OUR SERVICES FOR CLIENTS:
1) TRAINING PRESSING TECHNOLOGY.
To all our customers who bought equipment, we provide literature on the basics of tablet pressing. We carry out consultations by phone and by correspondence. We supply spare parts and consumables. We render services in the help on the realization of the hydraulic presses, second-hand.
2) WE COMPLETE MANUFACTURE OF TABLETS.
We have a large assortment of additional equipment for tablet production. At the request of the client, we will select a model for the desulphurizer of tablets, a vacuum powder feeding system for press silos, granulators, powder mixers, equipment for coating tablets, printers for printing logos on tablets, packing and packing equipment for tablets .
3) MANUFACTURING PUNCHES AND MATRIXES.
On a permanent basis, we produce press tools for hydraulic presses in our own production, we place orders for similar plants in India, China, and the USA.
Customer Testimonials (6)
Single-punched tablet type eccentric press. The maximum diameter of the finished tablets is 20 mm. The productivity is 3600 tablets per hour. It is made of stainless steel. Pressing force 3 tons. Suitable for the release of tablets with logos. We provide detailed instructions for setting up the press and producing tablets.