Video review of the model
Our service and customer service
Technical specifications
Pneumatic piston dispenser for creams and ointments “WW-100”
Type: pneumatic reciprocating feeder
Productivity: 5 to 20 doses per minute
Filling dosage: from 200 to 1000 ml
Filling accuracy: ± 1%
Applicable tolerance (m3 / min): ≥0.1
Air pressure: 0,6-0,8 MPa
Power consumption: 150 W
Power supply: 220V, 50Hz
Overall dimensions: 950mm x 300mm x 480mm
Machine weight: 40 kg
Weight with packing: 50 kg
Additional information
Compact design, ideal for use in confined spaces, laboratory and pharmaceutical conditions. The body and parts are made of SUS 304. Semi-automatic filling machine of piston type. Horizontal machine for filling liquid bottles from 200 ml to 1000 ml. Easy to operate, pneumatic part uses pneumatic components Germany. The filling is controlled by a solenoid valve, with high filling accuracy. The filling volume and feed rate can be adjusted as desired. A special three-way non-return valve system is used for accuracy of filling. Material contact parts can be customized SUS316. It is possible to make the bottom seal on the tank filler to avoid leakage. The diameter of the filling nozzle can be replaced at the request of the customer. All parts in contact with the material are made of stainless steel 316. The filling volume and speed can be adjusted, while maintaining high accuracy of dosing. The ointment, gel or viscous homogeneous substance is loaded into the large funnel, using the system of settings, the operator manually adjusts the amount of ointment of a single dose. Check the filling volume or weight. Further, a compressor is connected, which causes the piston to move by compressed air pressure. The start / stop control of the dose is possible from the foot pedal. The operator brings the container to the neck, pushes the pedal and the machine delivers the dose of the ointment to the jar, then the operator inserts a new container. It is possible to use this machine with a transporter and connect a photo sensor.
OUR SERVICES FOR CLIENTS:
1) TRAINING OF TECHNOLOGY OF DOSAGE OF CREAMS AND MAZES.
All our customers who purchased equipment, we provide literature on the basics of dosing cream and ointments in vials. We carry out consultations by phone and by correspondence, we help to solve arising difficulties at manufacture on our equipment. We supply spare parts and consumables. We render services in the help on realization of cream-filling equipment used.
2) COMPLETE PRODUCTION OF COSMETICS AND FOODSTUFFS.
We have a wide range of additional equipment for dosing production. At the request of the client we will select a model of dispensers of cream and ointments, homogenizers, equipment for packing creams in tubes, filling and packing equipment for filling bottles.
3) SPARE PARTS SUPPLY
We cooperate with manufacturers of automatic and semi-automatic dispensers and we supply spare parts for any model of dispensers of ointments, gels, creams, pastes bought in our company.