Revisión en video del modelo
Nuestro servicio y atención al cliente
After drying, the adhesive-coated transfer ribbon is fed to the cooling drum of the cooling and lamination unit. As the adhesive-coated transfer ribbon and the backing material pass between the cooling drum and the pressure roller, the adhesive coating is pressed onto the backing material (film, nonwoven fabric or fabric). This results in a triple laminate: base material, adhesive layer and transfer. During duplication, the speed of the backing material is automatically synchronized with the speed of the adhesive-coated paper belt. The triple laminate is wound on a roller installed in the winding unit. When the specified meterage is reached, the roll of triple laminate is removed from the winding unit by means of a hoist and sent to the cutting and packaging stage. The automatic coating line is operated by two process plant operators. The platform of the first operator is next to the coating unit, and the platform of the second operator is next to the cooling and lamination unit.
The automatic coating line produces not only Uniplast Fixing Leukoplasty, but also triple laminates for other leukoplasty products, including Uniplast Bactericidal and Veropharm Bactericidal Leukoplasty.
Glosario Farmacéutico
Especificaciones técnicas
In the duplication process, the adhesive coating is transferred from the transfer to the substrate. Siliconized paper is used as a transfer, and the backing can be film, fabric or nonwoven material. The roll of transfer paper is put on the roll, which is placed with the help of a hoist (suspended lifting device) in two safe chucks of unwinding unit No. 1. The roll is fixed, after which the transfer paper is pulled through a four-zone convector-type drying chamber. When leaving the drying chamber, the end of the transfer paper is tucked through the cooling and lamination unit and fixed on the roll of the winding unit. A roll with backing material is installed in unwinding unit No. 2. The end of the backing material is pulled through the frame of the winding unit and the guide frame. At the same time, the material is placed in such a way that at the entrance to the cooling and lamination unit it is facing the adhesive coating. After all these preparatory measures in the coating unit, the knife is put into working position. The line is set in motion by pressing the «Start» button on the main control panel.
Información adicional
A barrel with acrylate adhesive is installed in the coating unit. Using a pump, the adhesive from the drum is fed from the drum through a silicone hose to the siliconized paper moving under the knife. As the paper belt moves through the gap between the drum and the knife, the acrylate adhesive is entrained by the moving belt. At the same time, excess adhesive is removed by the knife, resulting in an even layer of acrylate adhesive coating the paper. The adhesive-coated paper strip passes through the drying chamber as the conveyor belt moves. In each of the four drying zones, hot air heated to a predetermined temperature is directed onto the surface of the adhesive-coated paper. The exhaust air is discharged from the drying chamber by means of an exhaust fan. The paper, while moving from the unwinding unit No. 1 to the coating unit, passes through a control system where its thickness is measured. The second device of the thickness control system is installed at the outlet of the drying chamber, where the thickness of the paper with the applied adhesive coating is measured. The comparison of the two measurements gives the thickness of the adhesive coating, which the operator can adjust by increasing or decreasing the gap between the knife and the drum.
Seguimiento del estado del pedido
Granulador de polvo seco y húmedo YR-90 El mes YR-90 ya pasó. Apresúrate a la fábrica. 22/07/2024 06:57
Nora, buenas tardes. La fábrica ha enviado su equipo a nuestro representante, ahora está formando un envío consolidado para su envío a la aduana. Te mantendremos informado. 22/07/2024 06:59
Empaquetadora flow-pack PU-420 junto con embalaje de 500 kg, entrega a Cáceres. Por favor confirme el tiempo de entrega. 22/07/2024 07:07
Buenas tardes Aiden, su envío se ha ido. Hora de llegada {hora}. El conductor le devolverá la llamada más tarde. Organice una descarga rápida. 22/07/2024 07:07
¿Cuándo está programada la entrega de la empaquetadora de tabletas blandas SL-20 en Oviedo? 22/07/2024 07:17
Hola Victoria, Espere mañana hasta las 13:30. Una vez recibido, háganoslo saber. 22/07/2024 07:19
¿Tiene que pagar la entrega a Tlaquepaque por encima del monto de entrega indicado en el contrato ? 22/07/2024 07:27
Avery, el catálogo muestra el precio con entrega a domicilio. La descarga del equipo, al recibir el envío, se le cobrará por separado. 22/07/2024 07:29
Somos de Nueva Jersey, pagamos el equipo en su factura de ayer. ¿Se ha recibido el pago? ¿Cuánto tiempo tardará en entregarnos? 22/07/2024 07:37
Logan, hola. El pago se acredita en nuestra cuenta de liquidación. Plazo de fabricación de su equipo por fábrica 20 días hábiles, entrega desde fábrica a nuestro almacén en EE. UU. 1 mes, entrega desde el almacén en Cuenca 15 días calendario. 22/07/2024 07:40
¿Puede venir su técnico a Terrassa? Necesitamos consulta y asistencia de tecnólogos. 22/07/2024 07:47
Oliver, Ya hemos recibido su correo electrónico. Un técnico mañana hasta las 15:30 se pondrá en contacto con usted. No te preocupes. 22/07/2024 07:50
Querido Roman. Fecha límite (time) Estoy esperando su presupuesto para una máquina para extraer tabletas y cápsulas de los blísteres MB-10 con entrega. 22/07/2024 07:57
Hola Michael, A la hora especificada le enviaremos la oferta a su correo electrónico. Ahora estamos esperando una respuesta de la empresa de transporte sobre el tiempo de entrega a Arrecife . 22/07/2024 08:01
Hola, preguntaré rápidamente, ¿qué pasa con la caldera de recubrimiento de película BG-80 y la máquina ultrasónica HX-7 para sellar tubos de plástico, contrato No. 11 ???? 22/07/2024 08:07
Nova, ¡buenas tardes! Sus posiciones son producidas por diferentes fábricas, para HX-7 la fábrica informó que está lista al 90%, para BG-80 estamos esperando una respuesta mañana hasta las 16:30. Informaremos de inmediato. 22/07/2024 08:11
Dime, ¿se fue la máquina automática de cápsulas NJ-120 ? 22/07/2024 08:17
Lucas, buenas tardes. Sí, ya mañana hasta las 12:30 lo recibirás. Teniendo en cuenta el gran peso del equipo, le pedimos que se encargue de la descarga con carretilla elevadora con anticipación. La empresa de transporte no proporciona descarga. Solo entrega a la dirección. 22/07/2024 08:18
Roman, ¿puedes decirme si ya se envió mi prensa rotativa para tabletas RZJ-35? No lo envíe todavía, le enviaré a su fábrica en China dibujos de nuevos punzones, diseño diferente. 22/07/2024 08:27
¡Buenas tardes, Alexander! Estamos pausando el envío. Envíe dibujos al correo de la oficina. Los términos de producción de nuevos punzones 20 días hábiles. 22/07/2024 08:28
- EQUIPO PARA PULIR Y DESEMPOLVAR TABLETAS Y CÁPSULAS
- EQUIPO PARA CONTAR Y ENVASAR COMPRIMIDOS Y CÁPSULAS EN FRASCOS
- MÁQUINAS PARA LA PRODUCCIÓN DE SUPOSITORIOS
- EQUIPO PARA RECUBRIMIENTO DE TABLETAS
- EQUIPO PARA LLENADO Y SELLADO DE AMPOLLAS DE VIDRIO
- EQUIPO PARA LLENAR CÁPSULAS DE GELATINA DURA CON POLVO
- EQUIPO DE LLENADO Y TAPADO DE BOTELLAS
- EQUIPO AUTOMÁTICO PARA EXTRAER COMPRIMIDOS Y CÁPSULAS DE BLÍSTERES.
- EQUIPO PARA LA PRODUCCIÓN DE TABLETAS
- MÁQUINAS DOSIFICADORAS DE ALTA PRECISIÓN MÁQUINAS DE LLENADO DE POLVO
- EQUIPO DE SECADO POR PULVERIZACIÓN PARA SUSPENSIONES
- EQUIPO PARA LLENADO DE CREMAS Y SELLADO DE TUBOS DE PLÁSTICO
- MÁQUINAS PARA FORMAR Y LLENAR AMPOLLAS DE PLÁSTICO
- EQUIPO PARA LAVAR Y ESTERILIZAR BIBERONES
- EQUIPO PARA EL ENVASADO DE COMPRIMIDOS Y CÁPSULAS EN BOTELLAS DE PLÁSTICO
- EQUIPO PARA IMPRIMIR LOGOTIPOS EN TABLETAS Y CÁPSULAS.
- EQUIPO PARA ENVASAR POLVOS EN VIALES
- EQUIPO PARA HOMOGENEIZAR CREMAS Y UNGÜENTOS
- EQUIPO DE GRANULACIÓN DE POLVO
- EQUIPO PARA ALIMENTACIÓN AUTOMÁTICA CON BIBERÓN PARA LÍNEAS DE LLENADO
- EQUIPO PARA ALIMENTACIÓN POR TORNILLO DE POLVOS
- CENTRIFUGADORAS FARMACÉUTICAS AUTOMÁTICAS
- EQUIPO PARA LA MEZCLA EFICIENTE DE POLVOS
- EQUIPO PARA TRANSPORTE DE POLVOS AL VACÍO
- EQUIPO AUTOMÁTICO PARA ETIQUETAS AUTOADHESIVAS EN ENVASES
- EQUIPOS PARA ENVASADO AL VACÍO EN BOLSAS DE PLÁSTICO
- EQUIPOS PARA LLENADO DE LÍQUIDOS EN BARRILES DE PLÁSTICO Y METAL.
- EQUIPOS PARA EL ENVASADO DE COMPRIMIDOS EN TIRAS Y TUBOS
- EQUIPO PARA DETECTOR DE METALES EN CÁPSULAS Y TABLETAS DE GELATINA
- EQUIPO PARA SELLADO POR INDUCCIÓN DE BOTELLAS DE ALUMINIO
- EQUIPOS PARA EL ENVASADO DE PRODUCTOS ALIMENTICIOS EN ENVASES DOY-PACK
- EQUIPO AUTOMÁTICO PARA ENVASADO EN BLÍSTER
- EQUIPO PARA APLICAR LA FECHA DE CADUCIDAD Y EL NÚMERO DE LOTE A LOS PRODUCTOS.
- EQUIPO PARA LA FABRICACIÓN Y ENVASADO DE TOALLITAS HÚMEDAS CON ALCOHOL
- EQUIPO PARA ENVASAR PRODUCTOS EN UN FLOW PACK
- EQUIPO PARA EMPACAR TÉ EN BOLSITAS DE TÉ CON HILO Y ETIQUETA.
- EQUIPOS PARA EL ENVASADO DE MATERIALES A GRANEL EN BOLSAS DE PLÁSTICO
- EQUIPO PARA EL LLENADO Y ENVASADO DE TINTURAS DE HIERBAS
- MÁQUINAS DE ENVASADO FLOW-PACK
- EQUIPO PARA CONTROL DE PESO Y CLASIFICACIÓN DE CAJAS DE CARTÓN CON MEDICAMENTOS
- EQUIPO PARA ENVOLVER CAJAS DE CARTÓN CON CELOFÁN
- EQUIPOS DE SOBREMESA PARA DOSIFICACIÓN DE LÍQUIDOS
- EQUIPO PARA DOSIFICACIÓN AUTOMÁTICA DE CREMAS Y UNGÜENTOS
- EQUIPO MANUAL PARA LLENAR CÁPSULAS DE GELATINA CON POLVO.
- EQUIPO PARA PRUEBAS DE LABORATORIO DE MEDICAMENTOS
- EQUIPO PARA PULVERIZAR MATERIAS PRIMAS FARMACÉUTICAS
- EQUIPO DE SOBREMESA PARA LA PRODUCCIÓN DE EMULSIONES A ALTA VELOCIDAD
- EQUIPO PARA TAMIZADO VIBRATORIO DE POLVOS
- MÁQUINAS QUE IMPRIMEN FECHA DE CADUCIDAD Y NÚMERO DE LOTE
- DISPENSADORES DE BOMBAS PERISTÁLTICAS
- EQUIPO DE SOBREMESA PARA MEZCLAR POLVOS
- EQUIPO PARA LA PRODUCCIÓN DE BOILIES DE PESCA
- EQUIPO PARA MEZCLAR LÍQUIDOS CON CALENTAMIENTO POR MICROONDAS
- EQUIPO SEMIAUTOMÁTICO PARA EL LLENADO DE CÁPSULAS DE GELATINA
- EQUIPO SEMIAUTOMÁTICO PARA ENVASADO DE BLÍSTERES
- EQUIPO DE LLENADO Y TAPADO DE BOTELLAS
- EQUIPO PARA EL ENVASADO DE COMPRIMIDOS Y CÁPSULAS EN BOTELLAS DE PLÁSTICO
- EQUIPO PARA ENVASAR POLVOS EN VIALES
- EQUIPO PARA CONTAR Y ENVASAR COMPRIMIDOS Y CÁPSULAS EN FRASCOS
- EQUIPO PARA LLENADO Y SELLADO DE AMPOLLAS DE VIDRIO
- EQUIPO PARA RECUBRIMIENTO DE TABLETAS
- EQUIPO PARA LLENAR CÁPSULAS DE GELATINA DURA CON POLVO
- EQUIPO PARA PULIR Y DESEMPOLVAR TABLETAS Y CÁPSULAS
- EQUIPO PARA LA PRODUCCIÓN DE TABLETAS
- EQUIPO DE SECADO POR PULVERIZACIÓN PARA SUSPENSIONES
- MÁQUINAS PARA FORMAR Y LLENAR AMPOLLAS DE PLÁSTICO
- EQUIPO AUTOMÁTICO PARA EXTRAER COMPRIMIDOS Y CÁPSULAS DE BLÍSTERES.
- EQUIPO PARA LLENADO DE CREMAS Y SELLADO DE TUBOS DE PLÁSTICO
- MÁQUINAS PARA LA PRODUCCIÓN DE SUPOSITORIOS
- EQUIPO PARA IMPRIMIR LOGOTIPOS EN TABLETAS Y CÁPSULAS.
- EQUIPO PARA LAVAR Y ESTERILIZAR BIBERONES
- MÁQUINAS DOSIFICADORAS DE ALTA PRECISIÓN MÁQUINAS DE LLENADO DE POLVO
- EQUIPO PARA TRANSPORTE DE POLVOS AL VACÍO
- EQUIPO PARA HOMOGENEIZAR CREMAS Y UNGÜENTOS
- EQUIPO PARA ALIMENTACIÓN POR TORNILLO DE POLVOS
- EQUIPO DE GRANULACIÓN DE POLVO
- EQUIPO PARA LA MEZCLA EFICIENTE DE POLVOS
- EQUIPO PARA ALIMENTACIÓN AUTOMÁTICA CON BIBERÓN PARA LÍNEAS DE LLENADO
- CENTRIFUGADORAS FARMACÉUTICAS AUTOMÁTICAS
- EQUIPOS PARA EL ENVASADO DE PRODUCTOS ALIMENTICIOS EN ENVASES DOY-PACK
- EQUIPO PARA EMPACAR TÉ EN BOLSITAS DE TÉ CON HILO Y ETIQUETA.
- EQUIPO PARA SELLADO POR INDUCCIÓN DE BOTELLAS DE ALUMINIO
- MÁQUINAS DE ENVASADO FLOW-PACK
- EQUIPOS PARA ENVASADO AL VACÍO EN BOLSAS DE PLÁSTICO
- EQUIPO PARA APLICAR LA FECHA DE CADUCIDAD Y EL NÚMERO DE LOTE A LOS PRODUCTOS.
- EQUIPO AUTOMÁTICO PARA ENVASADO EN BLÍSTER
- EQUIPOS PARA EL ENVASADO DE COMPRIMIDOS EN TIRAS Y TUBOS
- EQUIPO PARA LA FABRICACIÓN Y ENVASADO DE TOALLITAS HÚMEDAS CON ALCOHOL
- EQUIPO PARA CONTROL DE PESO Y CLASIFICACIÓN DE CAJAS DE CARTÓN CON MEDICAMENTOS
- EQUIPO AUTOMÁTICO PARA ETIQUETAS AUTOADHESIVAS EN ENVASES
- EQUIPO PARA DETECTOR DE METALES EN CÁPSULAS Y TABLETAS DE GELATINA
- EQUIPO PARA ENVOLVER CAJAS DE CARTÓN CON CELOFÁN
- EQUIPOS PARA LLENADO DE LÍQUIDOS EN BARRILES DE PLÁSTICO Y METAL.
- EQUIPOS PARA EL ENVASADO DE MATERIALES A GRANEL EN BOLSAS DE PLÁSTICO
- EQUIPO PARA ENVASAR PRODUCTOS EN UN FLOW PACK
- EQUIPO PARA EL LLENADO Y ENVASADO DE TINTURAS DE HIERBAS
- DISPENSADORES DE BOMBAS PERISTÁLTICAS
- EQUIPO PARA TAMIZADO VIBRATORIO DE POLVOS
- EQUIPO MANUAL PARA LLENAR CÁPSULAS DE GELATINA CON POLVO.
- EQUIPO PARA LA PRODUCCIÓN DE BOILIES DE PESCA
- EQUIPO DE SOBREMESA PARA MEZCLAR POLVOS
- EQUIPO PARA MEZCLAR LÍQUIDOS CON CALENTAMIENTO POR MICROONDAS
- MÁQUINAS QUE IMPRIMEN FECHA DE CADUCIDAD Y NÚMERO DE LOTE
- EQUIPO SEMIAUTOMÁTICO PARA EL LLENADO DE CÁPSULAS DE GELATINA
- EQUIPOS DE SOBREMESA PARA DOSIFICACIÓN DE LÍQUIDOS
- EQUIPO DE SOBREMESA PARA LA PRODUCCIÓN DE EMULSIONES A ALTA VELOCIDAD
- EQUIPO SEMIAUTOMÁTICO PARA ENVASADO DE BLÍSTERES
- EQUIPO PARA PULVERIZAR MATERIAS PRIMAS FARMACÉUTICAS
- EQUIPO PARA DOSIFICACIÓN AUTOMÁTICA DE CREMAS Y UNGÜENTOS
- EQUIPO PARA PRUEBAS DE LABORATORIO DE MEDICAMENTOS