Hydraulic tablet press «LP-18»
Number of press tool pairs : 1-10
Maximum pressing force: 180 KN ( 18000 kg/cm2 )
Maximum tablet diameter: 50 mm
Maximum tablet thickness: 30 mm
Maximum backfill depth in the die: 70 mm
Maximum output: 500-5000 tablets per hour
Top punch stroke: 100 mm
Feeder hopper height: 60 mm
Main motor power: 3 kW
Overall size: 1000mm x 600mm x 1500mm
Weight with packing: 1200 kg

The Model LP-18 is a small, continuously operating automatic hydraulic press. The machine can press special molds, rings, as well as tablets of different shapes, it is possible to print trademarks and logos on both sides of the tablets. The machine control on the LCD of all operating parameters can be adjusted. Bidirectional press, powerful feeder, high powder density in the tablet. Full control of the press through LCD panel. Hydraulic press is designed to press powdered tablets. Capacity is adjustable, with a maximum of 500- 5000 tablets in 1 hour. We complete this press with molds: dies of different diameters (from 20 to 50 mm) and punches. Punches with a long body are upper and installed in the upper part of the press. Punches with short body and long working part are lower and their task is to push the tablet out of the die. They are installed in the lower part of the press. The press operates in automatic mode. Before plugging the press into the network and starting work, it is necessary to carefully study the video instruction and familiarize yourself with the principles of its operation. After that, its operation will become clear and simple for you. All adjustments and settings are made in manual mode by turning the wheel. Be careful when connecting the electric motor, the direction must correspond to the direction indicated by the arrow. The powder is loaded into the press through a funnel-shaped hopper. It can be easily removed, rinsed and reinstalled. The powder is fed from the hopper via a feeder. An active feeder with forced powder feeding into the die is also available. When the hydraulic cylinder of the press is lifted, the powder is fed into the die, where it is pressed and then the finished tablet is pushed to the surface. There is a control unit on the body of the press. We make to order any sets of press tools (punches and dies for rotary tablet presses).